Weider 831.14623.0 user manual Must pivot freely, Nylon Locknut the Military Press Arm

Page 14

18. Apply grease to the 44mm Bushing (136) and	18
an M10 x 68mm Bolt (85). Then, insert the	18
an M10 x 68mm Bolt (85). Then, insert the
Bushing into the Military Press Frame (127).
Attach the Military Press Frame inside the Left
Upright (120) with the Bolt (85) and an M10			Grease
Nylon Locknut (77). Do not overtighten the			Grease
Nylon Locknut; the Military Press Frame		136
Nylon Locknut; the Military Press Frame			77
must pivot freely.			77
must pivot freely.		127
		127
			85
			120
19. Apply grease to an M10 x 40mm Bolt (142).	19
Attach the Military Press Arm (128) to the	19
Attach the Military Press Arm (128) to the			Grease
Military Press Frame (127) with the Bolt and an			Grease
M10 Nylon Locknut (77). Do not overtighten		127	77
the Nylon Locknut; the Military Press Arm		127	77
the Nylon Locknut; the Military Press Arm		142
must pivot freely.		142
must pivot freely.
			128
20. Apply grease to a 77mm Bushing (138) and to	20
an M10 x 100mm Bolt (140). Attach the Leg	20
an M10 x 100mm Bolt (140). Attach the Leg
Press Frame (123) to the Left Base (119) with	123
the Bushing, the Bolt, and an M10 Nylon	123
Locknut (77). Make sure the bushing is on	Bushing
the indicated side.	Bushing
Repeat this step with the Front Leg Press
Frame (132). Do not overtighten the Nylon		77	132
Locknuts (77); the Leg Press Frames must		77	132
pivot freely.
	119
	140	Grease
			138
	14

Image 14

Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Left Side Before YOU BeginRight Side Part Identification CHART-Model No .14623.0 R0606A Part Identification CHART-Model No .14623.0 R0606A Assembly Make Assembly Easier for YourselfLocknut, the Foot Plate must pivot Freely Frame AssemblyBox on page 7. See the Part Identifi Do not Tighten the Nylon Locknuts yetTighten the Nylon Locknuts yet Manner. Do not tighten the M10 Nylon Locknut yet Locknuts 78. Do not Tighten the Nylon Locknuts yetLocknut 77. Do not tighten the Nylon Locknut yet En the Nylon Locknuts yet Locknuts 77. Do not tighten the Nylon Locknuts yet104 110 103 100 101 120 122 119 Arm Assembly Locknut 77. Make sure the bushing is on Must pivot freelyNylon Locknut the Military Press Arm Locknuts 77 the Leg Press Frames must Pivot freelyShown Bend See the right inset drawing. Insert the LockRepeat this step for the Left Press Arm not Cable Assembly Identify the Butterfly Cable 50. Grease anLocknut 77. Make sure the Half Guards are Oriented as shown Flat edge of the Cable is against the Butterfly BracketIdentify the Lat Cable 49. Route the Cable Cable Trap and Half Guards are oriented as Shown Make sure the Cable Trap is oriented as Shown Identify the Press Cable 133. AttachEdge of the Cable is against the Left Frame Identify the Leg Lever Cable 51. Route Make sure the Half Guards are oriented as ShownLocknut Guards are oriented as shown Locknut 77. Make sure the Half Guards are Oriented as shown Seat Assembly Repeat this step for the Left Backrest Frame Not shownRepeat this step for the Left Butterfly Pad Frame. Make sure the Adjustment KnobPasses through one of the holes in the Right Seat Frame Repeat this step for the other Pad Tube Front LegMay be necessary to loosen the M10 Nylon Page Attaching the Accessories AdjustmentsChanging the Weight Setting Locking the Weight Stack Using the Curl PADAdjusting the Backrest Pad to use the press armsLocking the LEG Lever Weight Resistance Chart LbsCable Diagram Leg Lever Cable Maintenance Tightening the CablesExercise Guidelines Staying Motivated Muscle ChartCooling Down Aerobic Exercise Exercise Weight Sets RepsDate Thursday Aerobic Exercise DateMonday Part LIST-Model No Key Qty Description111 Exploded DRAWING-Model No R0606A Exploded DRAWING-Model No DAY Full Warranty Get it fixed, at your home or ours