Weider 831.14623.0 user manual Cable Diagram

Page 32

CABLE DIAGRAM

The cable diagram shows the proper routing of the cables (49, 50, 133, 51). Use the diagram to make sure that the cable and the cable traps have been assembled correctly. If the cable has not been correctly routed, the weight system will not function properly and damage may occur. The numbers show the correct route for the cable. Make sure that the cable traps do not touch or bind the cable.

				Lat Cable (49)
	4			Length 211" / 536cm
	4
	8	6	4
5	2		5	2
5	2			2
	1			1
	Butterfly Cable (50)	9
	Length 119" / 302cm	9		3
				3
		7
	3
			10
	5
	4
				1
			3	2
	Press Cable (133)
	Length 125" / 318cm
	32

Image 32

Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Left Side Before YOU BeginRight Side Part Identification CHART-Model No .14623.0 R0606A Part Identification CHART-Model No .14623.0 R0606A Assembly Make Assembly Easier for YourselfFrame Assembly Box on page 7. See the Part IdentifiLocknut, the Foot Plate must pivot Freely Do not Tighten the Nylon Locknuts yetTighten the Nylon Locknuts yet Manner. Do not tighten the M10 Nylon Locknut yet Locknuts 78. Do not Tighten the Nylon Locknuts yetLocknut 77. Do not tighten the Nylon Locknut yet En the Nylon Locknuts yet Locknuts 77. Do not tighten the Nylon Locknuts yet104 110 103 100 101 120 122 119 Arm Assembly Must pivot freely Nylon Locknut the Military Press ArmLocknut 77. Make sure the bushing is on Locknuts 77 the Leg Press Frames must Pivot freelyShown Bend See the right inset drawing. Insert the LockRepeat this step for the Left Press Arm not Cable Assembly Identify the Butterfly Cable 50. Grease anLocknut 77. Make sure the Half Guards are Oriented as shown Flat edge of the Cable is against the Butterfly BracketIdentify the Lat Cable 49. Route the Cable Cable Trap and Half Guards are oriented as Shown Make sure the Cable Trap is oriented as Shown Identify the Press Cable 133. AttachEdge of the Cable is against the Left Frame Identify the Leg Lever Cable 51. Route Make sure the Half Guards are oriented as ShownLocknut Guards are oriented as shown Locknut 77. Make sure the Half Guards are Oriented as shown Seat Assembly Repeat this step for the Left Backrest Frame Not shownFrame. Make sure the Adjustment Knob Passes through one of the holes in the Right Seat FrameRepeat this step for the Left Butterfly Pad Repeat this step for the other Pad Tube Front LegMay be necessary to loosen the M10 Nylon Page Attaching the Accessories AdjustmentsChanging the Weight Setting Using the Curl PAD Adjusting the BackrestLocking the Weight Stack Pad to use the press armsLocking the LEG Lever Weight Resistance Chart LbsCable Diagram Leg Lever Cable Maintenance Tightening the CablesExercise Guidelines Staying Motivated Muscle ChartCooling Down Exercise Weight Sets Reps DateAerobic Exercise Thursday Aerobic Exercise DateMonday Part LIST-Model No Key Qty Description111 Exploded DRAWING-Model No R0606A Exploded DRAWING-Model No DAY Full Warranty Get it fixed, at your home or ours