Weider 831.14623.0 user manual Locknut 77. Make sure the Half Guards are Oriented as shown

27. Wrap the Butterfly Cable (50) under a 90mm	27
Pulley (48). Attach the Pulley and two Half
Guards (55) to the Double “U”-bracket (61) with
an M10 x 50mm Bolt (97) and an M10 Nylon
Locknut (77). Make sure the Half Guards are
oriented as shown.
	50	77
	48
	97	55
	55	61
28. Wrap the Butterfly Cable (50) over a “V”-pulley	28
(47). Attach the “V”-pulley, a Long Cable Trap
	79
(57), an M10 Washer (80), and two Guards (54)		54
to the Right Upright (2) with an M10 x 63mm
		57
Bolt (79) and an M10 Nylon Locknut (77).
		50
	47 80
	54
		2
		77
29. Grease an M8 x 22mm Shoulder Bolt (90).	29
Attach the Butterfly Cable (50) to the Right
Butterfly Bracket (29) with the Shoulder Bolt	Grease	90
and an M8 Nylon Locknut (78). Make sure the		50
flat edge of the Cable is against the Butterfly	78
Bracket.
	29
		Flat Edge
	17