Weider 831.14623.0 user manual May be necessary to loosen the M10 Nylon

62. Attach the Butterfly Cover (30) to the Butterfly	62
Frame (5) with four M4 x 12mm Self-tapping
Screws (102).			102
			30	5
			102
63. Attach a Shroud (21) to the Top Center Frame	63		110	110
and Bottom Center Base (148, 147) with four
M4 x 12mm Self-tapping Screws (102). Note: It		104
may be necessary to loosen the M10 Nylon				104
Locknuts (77) and the two indicated M10 x
		77		77
82mm Bolts (84) securing the Top Center
Frame and the Weight Guides (18).		84		84
Attach the other Shroud (21) in the same
manner.				148
Attach the Shroud Covers (23) to the Shrouds				102
(21) with six M4 x 16mm Self-tapping Screws				21
(110) and six M4 Washers (104). Tighten any
M10 Nylon Locknuts (77) and M10 x 82mm
Bolts (84) that were loosened.
				23
				18
		110	21	147
				110
		104
				102
				104
				23
	26