Weider 831.14623.0 Seat Assembly, Repeat this step for the Left Backrest Frame Not shown

54. Wrap the Leg Lever Cable (51) around a “V”-	54
pulley (47). Attach the Pulley to the Right			2
Upright (2) with an M10 x 68mm Bolt (85), two		55
Half Guards (55), an M10 Washer (80), a Long
Cable Trap (57), and an M10 Nylon Locknut		57
(77). Make sure the Cable Trap and Half
		47	77
Guards are oriented as shown.
		80
		51
		55
			85
55. Wrap the Leg Lever Cable (51) under a 90mm	55
Pulley (48). Attach the Pulley and a Cable Trap
		97
(56) to the Left Press Arm (15) with an M10 x
50mm Bolt (97), two Half Guards (55), an M10
Washer (80), and an M10 Nylon Locknut (77).
Make sure the Cable Trap and Half Guards
are oriented as shown.
				51
		55		56
			80	77
		15
			48	55
56. Remove the indicated M10 Nylon Locknut (77).	56
Attach the Leg Lever Cable (51) to the Right
Upright (2) with the M10 x 120mm Bolt (115),		2
an M10 Washer (80), a 7mm Spacer (111), and
the M10 Nylon Locknut.			115
				80 111
			51	77
Seat Assembly	57
57. Attach a Backrest (31) to the Right Backrest		2
		88
Frame (7) with two M6 x 16mm Screws (88), an
M6 x 32mm Screw (89), and an M6 Washer
(114).
Insert the Right Backrest Frame (7) into the	31			53
Right Upright (2) and tighten a Backrest		7
Adjustment Knob (53) into the Upright. Make
sure the Adjustment Knob passes through		89
one of the holes in the Backrest Frame.
		114
Repeat this step for the Left Backrest Frame
(3, not shown).
	24