Maytag W10201177B manual Plan Vent System, Optional exhaust installations

Plan Vent System

Choose your exhaust installation type

Recommended exhaust installations

Typical installations vent the dryer from the rear of the dryer.

B

	C
A	D
	E
	F
	G
	H
A. Dryer	E. Clamps
B. Elbow	F. Rigid metal or flexible metal vent
C. Wall	G. Vent length necessary to connect elbows
D. Exhaust hood	H. Exhaust outlet

Optional exhaust installations

Venting systems come in many varieties. Select the type best for your installation.

This dryer can be converted to exhaust out the bottom. If you prefer, you may contact your local dealer to have the dryer converted.

This dryer can also be exhausted from the rear to either the right or left side. Optional kits for these exhaust installations are needed. Refer to the manufacturer’s instructions for kit installation instructions.

AB

A. Standard rear offset exhaust installation

B. Rear exhaust installation to the right or left side

CD

C. Bottom exhaust installation

D. Over-the-top installation (also available with one offset elbow)

NOTE: The following kits for close clearance alternate installations are available for purchase. Please see the “Assistance or Service” section to order.

■Over-the-Top Installation: Part Number 4396028

■Periscope Installation (For use with dryer vent to wall vent mismatch): Part Number 4396037 - 0" (0 mm) to 18" (457 mm) mismatch

Part Number 4396011 - 18" (457 mm) to 29" (737 mm) mismatch Part Number 4396014 - 29" (737 mm) to 50" (1270 mm) mismatch

■Rear exhaust installation to left or right side: Part Number 4396011

■Vent extension:

Part Number 8544761

■Bottom Exhaust:

Part Number 8212503

10