Delicate, Sensor Preset Cycle Settings | Maytag W10201177B manual

Maytag W10201177B Delicate, Sensor Preset Cycle Settings, Steam Cycles, Rapid Refresh Small Load

Delicate

Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses, or washable knit fabrics.

Sensor Preset Cycle Settings

Sensor Cycles Load Type	Temperature
BULKY	Medium
Jackets, comforters, pillows

HEAVY DUTY	Regular*
Heavyweight mixed loads, cottons, jeans	Medium heat is selectable as an
	Medium heat is selectable as an
	alternate temperature.

NORMAL	Medium*
Corduroys, work clothes, sheets	Low heat is selectable as an
	Low heat is selectable as an
	alternate temperature.

WRINKLE CONTROL	Low*
Business casual clothes, permanent press, synthetics	Extra-low heat is selectable as
	Extra-low heat is selectable as
	an alternate temperature.

DELICATE	Extra-Low
Lingerie, blouses, washable knit fabrics

*Preferred setting

Steam Cycles

Use Steam Cycles to help smooth out wrinkles from dry items, such as clothes that have been worn or clothes that have been left in the dryer too long. When a Steam Cycle is selected, the estimated time remaining display shows the actual time remaining in the cycle.

NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without.

Use of a fabric softener sheet is not recommended with steam cycles as it may cause temporary staining on the clothes.

Rapid Refresh Small Load

This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetic garments. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The heat level and cycle time are not adjustable.

Custom Refresh

This cycle is best for touching up clothes that have been left in the dryer too long. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The dry time and temperature can be adjusted for this cycle.

NOTE: Overloading the dryer may not yield the same results.

Steam Preset Cycle Settings

Timed Cycles	Default Temperature*	Default Time
Load Type		(Minutes)*

RAPID REFRESH Small Load	Medium	15

CUSTOM REFRESH	Medium	20

*Temp Level and Time Adjust are selectable only for the Custom Refresh cycle.

NOTE:The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Medium and Regular temperature settings can be used for the Custom Refresh cycle.

Timed Cycles

Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing TIME ADJUST + (plus) or – (minus). See “Changing Cycles, Modifiers, and Options.”

NOTE: Timed Cycles may also be used with the drying rack. See “Drying Rack Option.”

Timed Dry

Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. Timed Dry can also be used with the drying rack.

Rapid Dry

Use this cycle for dying small loads that need short drying time.

Timed Preset Cycle Settings

Timed Cycles	Default	Default Time
Load Type	Temperature	(Minutes)

TIMED DRY	High	40
Heavyweight, bulky items, work
clothes

RAPID DRY	Regular	23
Small loads