Maytag W10201177B manual Reinstall the door

Reinstall the door

1.Remove the 4 screws and 2 hinges from the dryer door.

2.Replace the 4 screws in the same holes.

Screw & hinge locations

3.Remove the 4 screws from the opposite side of the door.

5.Install screws in the top hinge holes in the door. Do not tighten screws. Leave approximately ¼" (5 mm) of screw exposed.

A

A

Screw locations

4.Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel.

A. Install these screws first.

6.Hang door by placing screw heads into top slotted holes of hinges and slide door down. Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge screws.

7.Close door to engage door strike.

15