Emerson PN 51-FCL-1056 instruction manual Sensor assignment, Alarms

MODEL FCL-1056				SECTION 5.0
				PROGRAMMING THE ANALYZER
TABLE 5-1. DEFAULT SETTINGS
ITEM			CHOICES	DEFAULT
Sensor assignment
1.	Sensor 1		chlorine	chlorine
2.	Sensor 2		pH	pH
Outputs
1. Assignments (if FCL-01)
	a.	output 1	chlorine, temp	chlorine
	b.	output 2	chlorine, temp	temp
2. Assignments (if FCL-02)
	a.	output 1	chlorine, pH, temp	chlorine
	b.	output 2	chlorine, pH, temp	pH
3.	Range		0-20 or 4-20 mA	4 – 20 mA
4. 0 or 4 mA setting
	a.	chlorine and pH	-9999 to +9999	0
	b.	temperature	-999.9 to +999.9	0
5.	20 mA setting
	a.	chlorine	-9999 to +9999	10
	b.	pH	-9999 to +9999	14
	c.	temperature	-999.9 to +999.9	0
6.	Fault current (fixed)		0.00 to 22.00 mA	22.00 mA
7.	Dampening		0 to 999 sec	0 sec
8.	Simulate		0.00 to 22.00 mA	12.00 mA
Alarms
1.	Logic		high or low	AL1 low, AL2,3,4 high
2.	Assignments
	a.	AL1 and AL2	chlorine, pH, temp, fault,	chlorine (sensor 1)
			interval timer
	b.	AL3 and AL4	chlorine, pH, temp, fault,	temperature (sensor 1)
			interval timer
3.	Deadband		0 to 9999	0
4.	Interval timer settings
	a.	interval time	0.0 to 999.9 hr	24.0 hr
	b.	on time	0 to 999 sec	10 sec
	c.	recovery time	0 to 999 sec	60 sec

20