Emerson PN 51-FCL-1056 instruction manual Section Display and Operation

MODEL FCL-1056	SECTION 4.0
	DISPLAY AND OPERATION

SECTION 4.0

DISPLAY AND OPERATION

4.1. DISPLAY

The analyzer has a four line display. See Figure 4-1. The display can be customized to meet user require- ments. Refer to section 4.6.

When the analyzer is being programmed or calibrated, the display changes to a screen similar to the one shown in Figure 4-2. The live readings appear in small font at the top of the screen. The rest of the display shows programming and calibration information. Programming items appear in lists. The screen can show only four items at a time, and the arrow bar at the right of the screen indicates whether there are additional items in the list. See Figure 4.3 for an explanation of the arrow bar.

	1.	ppm
	7.	pH
T1:	25.0θC	O1: 12.00 mA
T2:	25.0 θC	O2: 12.00 mA
		Warning

FIGURE 4-1. Main Display

Live	1.00 ppm		25.0C
measurement	7.00 pH		25.0C
	Output 1 Configure
	Assign:	S1 Measurement
Item list	Range:		4-20 mA	Arrow
	Scale:		Linear	bar
			Warning
	Dampening:		0 sec

FIGURE 4-2. Programming Screen Showing Item List. The position of the cursor is shown in reverse video. See Section 4.2 and 4.3 for more information.

You are at the top of the list. There are more items for viewing. Scroll down.

You are at the bottom of the list. There are more items for viewing. Scroll up.

You are in the middle of the list. There are more items for viewing. Scroll up or down.

FIGURE 4-3. Arrow Bar. The arrow bar shows whether additional items in a list are available.

13