Check the unit nameplate for correct voltage and amperage before making electrical connections!
!DANGER
IMPROPER ELECTRICAL
CONNECTIONS CAN DAMAGE THE
UNIT AND CAUSE SERIOUS
OPERATOR INJURY OR DEATH!
MAKE SURE THAT ALL
ELECTRICAL CONNECTIONS ARE
MADE BY A QUALIFIED
ELECTRICIAN, AND THAT ALL CONNECTIONS ARE TIGHT.
Make all electrical supply connections at the front of the unit. An access panel covers all electrical connections. Run electrical connections to the supply terminals from either side of the unit. Make sure that all three phases are wired correctly. The pump runs backwards if not wired properly.
6017 Series Hot Oil Large Temperature Control Units | Page 27 |