GE IC3645SP4U400N3, IC3645SR4U404N2 operation manual Table of Contents

INSTALLATION AND OPERATION

SX TRANSISTOR CONTROL			Page 2
		Table of Contents ( Continued )
	2.1.3.d	Auto Braking	6
	2.1.4	Auxiliary Speed Control	6
	2.1.4.a	Field Weakening	6
	2.1.4.b	Speed Limits	7
	2.1.4.c	Proportional Operation for Dual Motor Vehicles	7
	2.1.5	Ramp Operation	7
	2.1.5.a	Ramp Start	7
	2.1.5.b	Anti-Rollback	7
	2.1.6	Steer Pump Contactor Time Delay	7
	2.1.7	On-Board Coil Drivers and Internal Coil Suppression	8
	2.2	System Protective Override	8
	2.2.1	Static Return to Off (SRO)	8
	2.2.2	Accelerator Volts Hold Off	8
	2.2.3	Pulse Monitor Trip (PMT)	8
	2.2.4	Thermal Protector (TP)	8
	2.2.5	Low Voltage	8
	2.3	Diagnostics	8
	2.3.1	Systems Diagnostics	8
	2.3.2	Status Codes	8
	2.3.2.a	Standard Status Codes	8
	2.3.2.b	Stored Status Codes	8
	2.3.3	Hourmeter Readings	9
	2.3.3.a	Maintenance Alert and Speed Limit	9
	2.3.4	Battery Discharge Indication (BDI)	9
	2.3.4.a	Internal Resistance Compensation	9
	2.3.5	Handset	9
	2.3.6	RS-232 Communication Port	9
	2.3.6.a	Dash Display Interaction Modes	9
	2.3.7	Circuit Board Coil Driver Modules	9
	2.3.8	Truck Management Module (TMM)	9
	2.4	Hydraulic Pump Control	9
Section 3.0	ORDERING INFORMATION, ELEMENTARY AND OUTLINE DRAWINGS		11
	3.1	Ordering Information for Separately Excited Controls	11
	3.2	Outline: SX-3 and SR-3 Package Size	12
	3.3	Traction Elementary	13
	3.4	Pump Elementary	14
	3.5	Traction and Pump Control Input / Output List	15
Section 4.0	TROUBLESHOOTING AND DIAGNOSTIC STATUS CODES		16
	4.1	General Maintenance Instructions	16
	4.2	Cable Routing and Separation	16
	4.2.1	Application Responsibility	16
	4.2.2	Signal/Power Level Definitions	16
	4.2.2.a	Low Level Signals (Level L)	16
	4.2.2.b	High Level Signals (Level H)	17
	4.2.2.c	Medium-Power Signals (Level MP)	17
	4.2.2.d	High-Power Signals (Level HP)	17
	4.2.3	Cable Spacing Guidelines	17
	4.2.3.a	General Cable Spacing	17
	4.2.4	Cabling for Vehicle Retrofits	17

January 2000