INSTALLATION
GAS HOOK-UP
STEP 1
Place the tank restraint in the island (Fig. 25).
STEP 2
Locate the tank restraint in the island within the recommended area (Fig. 24 and 26).
STEP 3
Once located, secure to the bottom of the island using all eight hole locations provided on the restraint. Wood screws can be used for wooden floors or 1/4 inch diameter anchor screws or bolts may be used if the floor is concrete or masonry (Fig. 27).
STEP 4
When secure, place the LP cylinder into the tank restraint making sure to seat the tank all the way down, securely affixing the tank in the restraint (Fig. 28).
STEP 5
Attach the regulator hose assembly and operate the grill normally as described in the Use and Care manual (Fig. 29).
Fig. 25
Fig. 26
Fig. 27
Fig. 28 | Fig. 29 |
19