INSTALLATION
SIDE SHELF (Optional accessory)
4.Place shelf in the up position and check that it is level.
If shelf is not level, adjust side shelf set screw. Set screws can be adjusted using a 3/32 Allen wrench (Fig. 50). Turn the Allen wrench clockwise to raise the shelf. Turn 1/4 turn and review to see if the shelf is level. The set screws in the left and right bracket should be adjusted equally to ensure the shelf sits level (Fig. 51).
Fig. 50 | Fig. 51 |
CHECK LIST
❏ Specified clearances main- | ❏ Adjustable low setting | supply | |
tained to combustibles. | satisfactory. | location. | |
❏ Verified proper enclosure | ❏ Drip pan in place properly | ❏ All radiants are assembled | |
ventilation. | and sliding freely. | and put in place. | |
❏ All internal packaging | ❏ Pressure regulator con- |
| |
removed. | nected and set for 4.0” | ■ PLEASE LEAVE THESE | |
| W.C. Natural, 11.0” W.C. LP | ||
❏ Knobs turn freely, bezels | INSTRUCTIONS WITH THE | ||
gas. | |||
centered. | USER. | ||
| |||
❏ Each burner lights satis- | ❏ Manual | ■ USER, PLEASE RETAIN | |
installed and accessible. | |||
factorily, individually or | THESE INSTRUCTIONS | ||
| |||
with adjacent burner lit. | ❏ Unit tested and free of | FOR FUTURE REFERENCE. | |
❏ Air shutters adjusted. | gas and water leaks . |
| |
|
| ||
| ❏ User informed of gas |
| |
|
|
|
26