Teledyne operating instructions Introduction Model 3000PA

1 Introduction Model 3000PA

Function Keys: Six touch-sensitive membrane switches are used to change the specific function performed by the analyzer:

•Analyze Perform analysis for oxygen content of a sample gas.

•System Perform system-related tasks (described in detail in chapter 4, Operation.).

•Span Span calibrate the analyzer.

•Zero Zero calibrate the analyzer.

•Alarms Set the alarm setpoints and attributes.

•Range Set up the 3 user definable ranges for the instrument.

Data Entry Keys: Six touch-sensitive membrane switches are used to input data to the instrument via the alphanumeric VFD display:

•Left & Right Arrows Select between functions currently displayed on theVFD screen.

•Up & Down Arrows Increment or decrement values of functions currently displayed.

•Enter Moves VFD display on to the next screen in a series. If

none remains, returns to the Analyze screen.

•Escape Moves VFD display back to the previous screen in a series. If none remains, returns to the Analyze screen.

Digital Meter Display: The meter display is a LED device that produces large, bright, 7-segment numbers that are legible in any lighting environment. It produces a continuous readout from 0-100 %. It is accurate across all ranges without the discontinuity of analog range switching.

Alphanumeric Interface Screen: The VFD screen is an easy-to-use interface from operator to analyzer. It displays values, options, and messages that give the operator immediate feedback.

Flowmeter: Monitors the flow of gas past the sensor. Readout is 0.2 to 2.4 standard liters per minute (SLPM).

Standby Button: The Standby turns off the display and outputs, but circuitry is still operating.

CAUTION: The power cable must be unplugged to fully disconnect power from the instrument. When chassis is exposed or when access door is open and power cable is connected, use extra care to avoid contact with live electrical circuits.

1-4 Teledyne Analytical Instruments