OPERATION | PROCEDURE 3 |
RESET CIRCUIT BREAKER/FUSE REPLACEMENT (FIGURE 9)
CIRCUIT BREAKER
NOTE: Key must be removed from ignition before resetting circuit breaker.
1.To reset, press circuit breaker button located on rear shroud.
FUSE REPLACEMENT
1.Remove seat. Refer to REMOVING/INSTALLING THE SEAT in PROCEDURE 5 of this manual.
2.Remove rear shroud. Refer to REMOVING/
INSTALLING REAR SHROUD in PROCEDURE 9 of this manual.
3.Flip top of fuse holder open.
4.Pull fuse out and install NEW fuse.
5.Reverse STEPS
Circuit
Breaker
RearButton
Shroud
Top
Fuse
Fuse Holder
FIGURE 9 - RESET CIRCUIT BREAKER/FUSE REPLACEMENT
OPERATION
Part No. 1090132 Rev F | 25 | Invacare Scooters |