PROCEDURE 5 | SEAT |
|
|
REMOVING (FIGURE 2)
1. Remove the stability knob located under the seat on the frame post.
CAUTION
When the seat height adjustment pin is removed, the weight of the seat assembly MUST be supported to prevent the seat from falling onto the frame.
SEAT
2.Perform one of the following:
A.For solid seat post and adjustable seat post
B.For adjustable height seat post - remove the seat height adjust- ment pin from seat post and retain for installation.
3.Lift seat assembly up and remove from frame post.
INSTALLING (FIGURE 2)
WARNING
Ensure that seat is locked into the forward position BEFORE and DURING operation of the scooter. Otherwise, injury to the user and/ or damage to the scooter may result.
1.Position seat post of seat assembly into frame post with seat in FORWARD position.
Seat
Stability
Knob
Frame | Seat | |
Post | ||
Post | ||
|
NOTE: Only the Contour Seat shown for clarity. The Deluxe Seat removes/installs in the same manner.
Adjustable
Height Seat
Post
Pin Lock
Bend End of Pin Lock
AWAY From Pin
FIGURE 2 - REMOVING/
INSTALLING THE SEAT
NOTE: For adjustable height seat posts ensure that the adjustment holes align with the holes on the SIDES of the frame post.
2.If necessary, rotate seat to the forward position. Refer to 90º SEAT SWIVEL ADJUSTMENT in this procedure of the manual.
WARNING
Ensure that the seat height adjustment pin is properly engaged and locked. Otherwise, injury and/or damage may result.
DO NOT use the stability knob to adjust the seat height. It is NOT designed to support the weight of the user. Otherwise, injury to the user and/or dam- age to the scooter may result.
3.Perform one of the following:
A.For solid seat post - lower seat assembly down until seat post rests on mount- ing screw installed inside frame post.
B.For adjustable height seat post - lower seat assembly down to desired height and install seat height adjustment pin through frame post and seat post and secure. Refer to ADJUSTING THE SEAT HEIGHT in this procedure of the manual.
Invacare Scooters | 34 | Part No. 1090132 Rev F |