BACK
PROCEDURE 7 | ARMS |
|
|
This Procedure Includes the Following:
Armrest Angle Adjustment
Armrest Width Adjustment
Armrest Depth/Height Adjustment
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise, injury or damage may result.
ARMREST ANGLE ADJUSTMENT
ALL SEATS BUILT AFTER 10/ | Armrest | ||
00 AND CONTOUR | |||
SEATS BUILT BEFORE 10/00 |
| ||
(FIGURE 1) | Mounting | ||
1. | Lift the armrest up. | Screw | |
| |||
2. | Loosen adjustment locknut. | Adjustment | |
3. | Adjust mounting screw up or down to | ||
Locknut | |||
| the desired arm angle position. | FIGURE 1 - ARMREST ANGLE | |
4. | Retighten adjustment locknut. | ||
ADJUSTMENT - ALL SEATS BUILT | |||
5. | To determine the same angle for the | ||
AFTER 10/00 AND CONTOUR | |||
| opposite armrest, count the exposed | ||
| SEATS BUILT BEFORE 10/00 | ||
| threads on the socket screw. | ||
|
| ||
6. | Repeat STEPS |
| |
|
ARMREST WIDTH | MEASURE THIS |
|
ADJUSTMENT | DISTANCE |
|
ALL MODELS EXCEPT |
|
|
(FIGURE 2) |
| Armrest |
1. Loosen the adjustment knob located |
|
|
either beneath the seat frame or on |
|
|
the back of the seat frame. |
|
|
2. Adjust armrest in or out to the desired |
|
|
position. |
|
|
CAUTION |
| Seat |
The armrest can be adjusted to a | Adjustment Knob | Frame |
maximum distance of | NOTE: Only Contour Seat shown for clarity. | |
between the inside of the armrest | ||
and the mounting shaft the armrest | Width adjusts in the same manner for Deluxe | |
is inserted into. If the armrest is | Seat. |
|
FIGURE 2 - ARMREST WIDTH | ||
adjusted beyond the maximum | ADJUSTMENT |
|
2 inches, it will fall out. |
|
|
3.Retighten adjustment knob securely.
4.Measure distance between back and inside of armrest.
5.Repeat STEPS
STEP 4. | 42 | Part No. 1090132 Rev F |
Invacare Scooters |