Invacare PANTHER MX-4 Model Panther MX-4 Figure, Detail a Back View of Headlight Assembly

Page 60

OPTIONS/REPLACEMENT PARTS

PROCEDURE 11

OPTIONS/REPLACEMENT PARTS

MODEL PANTHER MX-4 (FIGURE 10)

NOTE: Prongs on lightbulb plug are not equally spaced around diameter. Once removed, lightbulb plug can only be installed with prongs in the orientation in which they were removed.

1.Before removing lightbulb plug, place a scribe mark on a prong and the slot in which it is positioned in. See DETAIL "A".

NOTE: When reassembling, the scribe mark will help align the prongs with the proper corre- sponding slots on the headlight assembly.

2.To remove lightbulb plug, twist lightbulb plug COUNTERCLOCKWISE and remove from headlight assembly.

3.Remove lightbulb from headlight assembly.

4.To install light bulb, align prong of NEW lightbulb with the slot in the head light assembly and insert.

5.Install plug into headlight assembly at the orientation noted from above and twist

CLOCKWISE.

DETAIL "A" - BACK VIEW OF HEADLIGHT ASSEMBLY

Place scribe

mark near

corresponding slot

of headlight

assembly.

		Place scribe
	Partial View of	mark on
	Partial View of	prong.
	Headlight	prong.
	Headlight
	Assembly
		Lightbulb Plug
	Notch	Headlight
		Assembly

Lightbulb

Prong

ProngsPlug

FIGURE 10 - REPLACING HEADLIGHT LIGHTBULBS

MODEL PANTHER MX-4

Invacare Scooters

60

Part No. 1090132 Rev F

Image 60

Contents Invacare Scooters Special Notes Table of Contents Procedure 10 Transport Specifications SpecificationsSpecifications General Guidelines Procedure General WarningsOperating Information General GuidelinesProcedure General Guidelines RampsElectrical Weight Limitation General Warnings Grounding InstructionsBatteries Rain TestGeneral Guidelines Important Information SAFETY/HANDLING Percentage of Weight DistributionStability and Balance Always wear your seat positioning strapStairways ESCALATORS? SorryDelta Tiller Standard TillerSafety INSPECTION/MAINTENANCE Safety INSPECTION/ MaintenanceMaintenance Suggested Maintenance ProceduresSafety INSPECTION/MAINTENANCE Procedure Lubrication Points Figure Detail aTroubleshooting Guide Procedure Safety INSPECTION/MAINTENANCEControl Panel Features Operation ProcedureALL Scooter Models With Delta or Standard Tillers FigureProcedure Operation Detail a ZOOM-3Delta Tiller Panther MX-4 WPanther MX-4 Scooters only With Delta Tillers FigureDetail F Procedure Operation Operation of the Scooter FiguresUsing the Hand Brake LEVER/BRAKE ARM Figure Hand Brake LeverBrake ARM Delta TillersBrake Release Lever ALL Models Except Panther MX-4 FigurePanther MX-4 only Figure Reset Circuit BREAKER/FUSE Replacement Figure Fuse ReplacementCircuit Breaker REMOVING/INSTALLING the Batteries with Cables Figure Procedure BATTERIES/CHARGINGRemoving BATTERIES/CHARGINGRecommended Battery Types BATTERIES/CHARGING ProcedureReplacing the Batteries Figure BATTERIES/CHARGING Cleaning Battery Terminals DiatelyModel Battery Charger Power Cord Charging the BatteriesRemote Battery Charger Figure ON-BOARD Battery Charger FigureBattery Charger Operation Figure Battery Charger Operation Remote and ON-BOARDREMOVING/INSTALLING the Seat Seat ProcedureDetermining Seat Post Type Figure SeatInstalling Figure Procedure SeatRemoving Figure Adjusting the Seat Height Solid Seat Post FigureAdjustable Height Seat Post Figure Detail aAdjusting the Seat Depth AdjustmentALL Models Except ZOOM-3 Figure Using the Adjustable Seat Slide Figure Adjusting the Seat DepthREMOVING/INSTALLING the Seat UPHOLSTERY/ Cushion Figure InstallingREMOVING/INSTALLING FOLDING/UNFOLDINGBack Figure Back CUSHION/UPHOLSTERY FigureAdjusting the Back Recline Adjusting the HeadrestBack Procedure ALL Models Except ZOOM-3, SX-3 and LX-3 FigureArmrest Angle Adjustment AdjustmentArmrest Width Armrest DEPTH/HEIGHT Adjustment ALL Models Except ZOOM-3 Figure DepthHeight Figure Tiller Angle Adjustment Tiller AdjustmentProcedure Tiller Adjustment Fold Down Tiller ZOOM-3 FigureALL Other Models Figure FivePosition Models Built AfterREMOVING/INSTALLING the Rear Shroud Figure Procedure SHROUD/WHEELSALL Models REMOVING/INSTALLING the Rear Wheels Figure SHROUD/WHEELS ProcedureTurn Power OFF and remove key from ignition REMOVING/INSTALLING the Front Wheels Figure SHROUD/WHEELSModels ZOOM-3 and Lynx SX-3 Models Lynx LX-3 and LX-3 PlusDo not USE TOP Mounting HoleProcedure Transport Transporting the Scooter Figures 1Disassembling the Scooter TransportDetail B Models Built with Delta Tillers Transporting the Scooter for ALL Models Except ZOOM-3Transport Procedure Cable Side ViewSteps 8 and 9 for ALL Models Except ZOOM-3 Disassembled ViewALL Models Except ZOOM-3 REMOVING/INSTALLING the Front Basket Figure OPTIONS/REPLACEMENT PartsProcedure OPTIONS/REPLACEMENT Parts REMOVING/INSTALLING the Floor Basket Figure REMOVING/INSTALLING the Seat Positioning Strap FigureOPTIONS/REPLACEMENT Parts Procedure REMOVING/INSTALLING the CRUTCH/CANE Holder Figure REMOVING/INSTALLING the Safety Flag FigureOPTIONS/REPLACEMENT PartsANTI-TIPPER Wheel Assembly ANTI-TIPPER WheelsReplacing Seat Lever Figure Replacing Seat LeverReplacing Tiller Angle Adjustment Lever Figure Replacing Headlight LightbulbsModels Lynx LX-3 and Panther LX-4 Figure Lynx LX-3 and Panther LX-4Detail a Back View of Headlight Assembly Model Panther MX-4 FigureReplacing ON-BOARD Battery Charger Figure Replacing ON-BOARD Battery ChargerInvacare Scooters Part No Rev F Limited Warranty Limited W ArrantyOne InvacareWay