SEAT | PROCEDURE 5 | |
|
|
|
90º SEAT SWIVEL ADJUSTMENT
ALL MODELS EXCEPT ZOOM-3 (FIGURE 5)
WARNING
Ensure that seat is locked into the forward position BEFORE and DUR- ING operation of the scooter. Otherwise, injury to the user and/or dam- age to the scooter may result.
CAUTION
PANTHER
SEAT
1.The swivel release lever is located just beneath the seat on the right side.
2.Pull the swivel release lever UP to rotate the seat.
NOTE: The seat locks in position at 90º intervals. The seat is locked when an audible click is heard.
3. Rotate the seat to the desired position.
Seat
NOTE: Seat swivels 360º in either direction.
Seat
Swivel Release Lever (Lift UP to activate)
NOTE: Only the Contour Seat shown for clarity.
The Deluxe Seat swivels in the same manner.
FIGURE 5 - 90º SEAT SWIVEL
ADJUSTMENT
ADJUSTING THE SEAT DEPTH
ALL MODELS EXCEPT
NOTE: This procedure applies to the Contour Seat ONLY. To adjust the seat depth on the Deluxe Seat, refer to ADJUSTABLE SEAT SLIDE in this procedure of the manual.
1.Remove the seat. Refer to REMOVING/INSTALLING THE SEAT in this procedure of the manual.
2.Remove the seat upholstery and cushion insert. Refer to REMOVING/INSTALLING THE SEAT UPHOLSTERY in this procedure of the manual.
3.Place seat assembly upside down on ground/floor.
4.Remove the four (4) mounting screws, washers, and lockwashers that secure the swivel seat assembly and seat stand to the seat.
NOTE: When aligning the swivel seat assembly with the seat stand, the swivel lever must be positioned on either side so that the lever sits in the cutout provided on the seat stand.
5.Align the following three (3) items:
A.The slots on the swivel seat assembly.
B.The slots on the seat stand.
C.One (1) of the two (2) mounting positions on the underside of the seat.
Part No. 1090132 Rev F | 37 | Invacare Scooters |