TRANSPORT | PROCEDURE 10 |
|
|
WARNING
When reassembling scooter, ensure retaining pin is properly engaged securing the front and rear frame together. Otherwise, injury and/or damage may result.
9.Pull retaining pin that secures the rear frame and front frame assemblies together (FIGURE 2).
10.Separate front frame assembly from the rear frame assembly (FIGURE 2).
11.Fold tiller down. Refer to TILLER ANGLE ADJUSTMENT in PROCEDURE 8 of this manual.
STEPS 8 AND 9 FOR ALL MODELS EXCEPT ZOOM-3
Retaining
Front FramePin
Assembly
Rear Frame
Assembly
DISASSEMBLED VIEW
Front Basket
Seat
Rear
Shroud
TRANSPORT
Batteries
ZOOM-3
One Piece
Frame Assembly
ALL MODELS EXCEPT ZOOM-3
Front
Assembly
Rear
Assembly
FIGURE 2 - TRANSPORTING THE SCOOTER
Part No. 1090132 Rev F | 53 | Invacare Scooters |