Invacare PANTHER MX-4, PANTHER LX-4, LYNX LX-3PLUS Transport Procedure, Cable Side View

Page 52

TRANSPORT

TRANSPORT

PROCEDURE 10

 

 

8.For Panther MX-4 Models Built Before 10/00 - Without Delta Tillers (FIGURE 3):

WARNING

When reassembling scooter, ensure retaining pin is properly engaged in the hand brake cable. Otherwise, injury and/or damage may result.

A.Pull the retaining pin that secures the hand brake cable assembly together (DETAIL "A").

B.Remove the hand brake cable from the retaining tab located underneath the front shroud (DETAILS "B" & "C").

NOTE: Note the position of the locknut in relation to the frame tab for proper reinstallation. When re-assembling the hand brake cable assembly, the locknut must be positioned in front of the frame tab (DETAILS "D" & "E").

C. Remove the threaded end of the hand brake cable from the frame tab of the rear sub-

frame. DETAIL "A"

DETAIL "D" - REMOVING HAND

Rear

 

BRAKE CABLE

Sub Frame

Retaining Pin

Threaded End

 

 

 

of Cable Assembly

 

Hand Brake

 

 

Cable Assembly

 

DETAIL "B"

 

 

Frame Tab of Rear

 

Sub-Frame

 

DETAIL "E" - INSTALLING HAND

Retaining Tab

BRAKE CABLE ASSEMBLY

Locknut

 

Hand Brake Cable

Threaded End

 

of Hand Brake

DETAIL "C" - HAND BRAKE

Cable Assembly

CABLE - SIDE VIEW

 

Rear

 

Hand Brake Cable

Frame Tab

Rear Wheel

NOTE: Side view shows location of Hand Brake Cable.

FIGURE 3 - TRANSPORTING THE SCOOTER - FOR PANTHER MX-4

MODELS BUILT BEFORE 10/00 - WITHOUT DELTA TILLERS

Invacare Scooters

52

Part No. 1090132 Rev F

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Invacare Scooters Special Notes Table of Contents Procedure 10 Transport Specifications SpecificationsSpecifications General Guidelines Procedure General WarningsOperating Information General GuidelinesRamps Procedure General GuidelinesElectrical Weight Limitation General Warnings Grounding InstructionsBatteries Rain TestGeneral Guidelines Important Information SAFETY/HANDLING Percentage of Weight DistributionStability and Balance Always wear your seat positioning strapStairways ESCALATORS? SorryDelta Tiller Standard TillerSafety INSPECTION/MAINTENANCE Safety INSPECTION/ MaintenanceSuggested Maintenance Procedures MaintenanceSafety INSPECTION/MAINTENANCE Procedure Lubrication Points Figure Detail aTroubleshooting Guide Procedure Safety INSPECTION/MAINTENANCEControl Panel Features Operation ProcedureALL Scooter Models With Delta or Standard Tillers FigureProcedure Operation Detail a ZOOM-3Delta Tiller Panther MX-4 WWith Delta Tillers Figure Panther MX-4 Scooters onlyDetail F Procedure Operation Operation of the Scooter FiguresUsing the Hand Brake LEVER/BRAKE ARM Figure Hand Brake LeverBrake ARM Delta TillersALL Models Except Panther MX-4 Figure Brake Release LeverPanther MX-4 only Figure Fuse Replacement Reset Circuit BREAKER/FUSE Replacement FigureCircuit Breaker REMOVING/INSTALLING the Batteries with Cables Figure Procedure BATTERIES/CHARGINGRemoving BATTERIES/CHARGINGBATTERIES/CHARGING Procedure Recommended Battery TypesReplacing the Batteries Figure BATTERIES/CHARGING Cleaning Battery Terminals DiatelyModel Battery Charger Power Cord Charging the BatteriesRemote Battery Charger Figure ON-BOARD Battery Charger FigureBattery Charger Operation Figure Battery Charger Operation Remote and ON-BOARDREMOVING/INSTALLING the Seat Seat ProcedureDetermining Seat Post Type Figure SeatProcedure Seat Installing FigureRemoving Figure Adjusting the Seat Height Solid Seat Post FigureAdjustable Height Seat Post Figure Detail aAdjustment Adjusting the Seat DepthALL Models Except ZOOM-3 Figure Using the Adjustable Seat Slide Figure Adjusting the Seat DepthREMOVING/INSTALLING the Seat UPHOLSTERY/ Cushion Figure InstallingREMOVING/INSTALLING FOLDING/UNFOLDINGBack Figure Back CUSHION/UPHOLSTERY FigureAdjusting the Back Recline Adjusting the HeadrestBack Procedure ALL Models Except ZOOM-3, SX-3 and LX-3 FigureAdjustment Armrest Angle AdjustmentArmrest Width ALL Models Except ZOOM-3 Figure Depth Armrest DEPTH/HEIGHT AdjustmentHeight Figure Tiller Angle Adjustment Tiller AdjustmentProcedure Tiller Adjustment Fold Down Tiller ZOOM-3 FigureALL Other Models Figure FivePosition Models Built AfterProcedure SHROUD/WHEELS REMOVING/INSTALLING the Rear Shroud FigureALL Models SHROUD/WHEELS Procedure REMOVING/INSTALLING the Rear Wheels FigureTurn Power OFF and remove key from ignition REMOVING/INSTALLING the Front Wheels Figure SHROUD/WHEELSModels ZOOM-3 and Lynx SX-3 Models Lynx LX-3 and LX-3 PlusDo not USE TOP Mounting HoleProcedure Transport Transporting the Scooter Figures 1Disassembling the Scooter TransportDetail B Models Built with Delta Tillers Transporting the Scooter for ALL Models Except ZOOM-3Transport Procedure Cable Side ViewDisassembled View Steps 8 and 9 for ALL Models Except ZOOM-3ALL Models Except ZOOM-3 OPTIONS/REPLACEMENT Parts REMOVING/INSTALLING the Front Basket FigureProcedure OPTIONS/REPLACEMENT Parts REMOVING/INSTALLING the Seat Positioning Strap Figure REMOVING/INSTALLING the Floor Basket FigureOPTIONS/REPLACEMENT Parts Procedure REMOVING/INSTALLING the CRUTCH/CANE Holder Figure REMOVING/INSTALLING the Safety Flag FigureOPTIONS/REPLACEMENT PartsANTI-TIPPER Wheel Assembly ANTI-TIPPER WheelsReplacing Seat Lever Figure Replacing Seat LeverReplacing Tiller Angle Adjustment Lever Figure Replacing Headlight LightbulbsModels Lynx LX-3 and Panther LX-4 Figure Lynx LX-3 and Panther LX-4Detail a Back View of Headlight Assembly Model Panther MX-4 FigureReplacing ON-BOARD Battery Charger Figure Replacing ON-BOARD Battery ChargerInvacare Scooters Part No Rev F Limited Warranty Limited W ArrantyOne InvacareWay
Top Page Image Contents