Invacare LYNX LX-3PLUS Armrest DEPTH/HEIGHT Adjustment, ALL Models Except ZOOM-3 Figure Depth

PROCEDURE 7 ARMS

ARMREST DEPTH/HEIGHT ADJUSTMENT

ALL MODELS EXCEPT ZOOM-3 (FIGURE 3)

NOTE: These options are NOT available on the CONTOUR SEATS Built BEFORE 10/00.

DEPTH

1.Loosen bottom adjustment knob.

2.Adjust armrest to desired position.

3.Retighten bottom adjustment knob securely.

4.Measure distance from the back edge of armrest to the back edge of the armrest post.

5.Repeat STEPS 1-4 for opposite armrest setting armrest at distance determined in STEP 4.

MEASURE THIS

DISTANCE

Armrest Bottom

Adjustment Knob

FIGURE 3 - ARMREST DEPTH

ADJUSTMENT

BACK

HEIGHT (FIGURE 4)

1. Loosen the stability set screws on of the armrest post.

2.Remove the mounting screw and locknut that secure the armrest in place.

3.Adjust armrest to desired mounting position and secure with EXISTING mounting screw and locknut. Securely tighten.

4.Retighten the stability set screws on the armrest post.

5.Count the number of exposed mount- ing holes above the armrest armpost.

6.Repeat STEPS 1-4 for opposite armrest setting armrest at the mounting hole determined in STEP 5.

Armrest

COUNT

THESELocknut

HOLES

(STEP 5)

Mounting

Screw

Armpost	Stability
	Set Screws

FIGURE 4 - ARMREST HEIGHT

ADJUSTMENT

Part No. 1090132 Rev F 43 Invacare Scooters