Bushnell 70-0102 Altitude Alarm, Beep Function, Stopwatch Mode, Countdown / Reverse-Timer Mode

Page 5

Altitude Alarm

Sets the alarm to sound when the altitude reaches the programmed level. In the Alarm Mode, the Altitude alarm uses the same measurement units that were last set in the Altimeter Mode. To change this you must first change it in the Altimeter Mode. To adjust the altitude at which the alarm will go off, press ADJ to enter the setting mode. Press COMP/+ or BARO/- to change the altitude alarm setting. Press ADJ to save and exit.

Beep Function

In the Alarm Mode a Beep function is also available. When activated, the Beep function causes a beep sound to be made whenever a button is depressed, even when the Alarm function is turned off. To activate the function go to the Beep function in the Alarm Mode, press the ALTI button and ‘ON’ is displayed. Press again and ‘OFF’ is displayed.

Stopwatch Mode

Press MODE button until Stop Watch Mode is displayed. To operate, press COMP/+ button to start and press again to stop. Pressing BARO/- button will reset the Stop Watch.

Stop Watch Mode / Split Timing Function

For split timing function, press the BARO/- button while the Stop Watch is operating in order to stop the display and press again to continue. The display will show your time down to 1/100th of a second. You can also press the BARO/- button while the Stop Watch is operating to stop the display and then press the COMP/+ button to stop the Stop Watch and display the final reading. Press the BARO/- button again to reset the Stop Watch. Split timing function is displayed as ‘SPL’ when activated and the display returns

6 to normal when BARO/- button is pressed.

COUNTDOWN TIMER ALARM

Countdown / Reverse-Timer Mode

Press MODE button until Countdown Timer Mode is displayed, represented by ‘RT’ (reverse timer). To operate press COMP/+ button to start and press again to stop, then press BARO/- button to reset the Countdown Timer.

To set the Countdown Timer press and hold down ADJ button for 3 seconds, which will cause the seconds setting to blink. Adjust with the COMP/+ or BARO/- button, and then press MODE button to adjust next setting. Press ADJ button to save settings and exit. Press ALTI for ‘AUTO’ to allow Countdown Timer to repeat function automatically, and press ALTI again to turn off ‘AUTO’ function.

Press any button when alarm sounds to stop the Countdown Timer. If nothing is pressed the Countdown Timer will stop beeping after 10 seconds, but the countdown timer will continue if the ‘AUTO’ function is on. To stop the Countdown Timer if the ‘AUTO’ function is on, you must go to the Countdown Timer Mode and press COMP/+ to turn off the ‘AUTO’ function and then press ALTI button to stop it.

DIGITAL COMPASS

Compass Mode

Press MODE button until Time Mode is displayed, and then press COMP/+ button. If already in Time Mode, simply press COMP/+ button and Compass Mode is displayed. Hold the compass level using the bubble level to get a reading. If the Cardinal Points blink then the compass may need to be calibrated. (See trouble shooting tips.)

Compass Calibration

In Compass Mode, hold down ADJ button for 3 seconds. Calibration Mode is displayed. Put the compass on a level, non- magnetic surface and press the COMP/+ button. The word CAL will start blinking. Then, rotate the compass 2 full circles slowly WHILE HOLDING THE COMPASS LEVEL. Each revolution should take about 10 seconds. When done, press COMP/+ again. When completed, the display shows ‘DONE’ and it will then go

7

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Deluxe Digital Compass Navigateur Numérique de Luxe English Français Alti ADJLight COMP/+Date Settings Default Time Mode / Time SettingsNew Settings Alarm Setting ModeStopwatch Mode Altitude AlarmStop Watch Mode / Split Timing Function Countdown / Reverse-Timer ModeSelf Homing Mode Declination SettingNight Mode Low Battery IndicatorBarometer and Temperature Units Weather Forecast ModeAltimeter Mode SamplingInstalling a Battery Setting a Reference AltitudeMemory Function Reading Stored MemoriesTrouble Shooting Battery LifeAppendix HOW the Weather Forecaster Works Weather ForecastWarranty / Repair TWO-YEAR Limited WarrantyMode Rôle DES Boutons ADJNouveaux Réglages New Settings Réglages de Date Date SettingsMode Réglage Alarme Alarm Setting Mode Alarme Température Temperature AlarmMode Chronomètre Stopwatch Mode Alarme Altitude Altitude AlarmMode Navigateur Numérique Compass Mode Fonction Bip Beep FunctionMode Autoguidage Self Homing Mode Réglage de Déclinaison Declination SettingMode Nuit Night Mode Étalonnage du Navigateur Numérique Compass CalibrationMode Baromètre Barometer Mode Indicateur de Tension Faible de Pile Low Battery IndicatorMode Prévisions Météorologiques Weather Forecast Mode Icônes des Prévisions Météo Weather Forecasting IconsFonction de Mémoire Memory Function Mode Altimètre Altimeter ModeLecture des Données Mémorisées Reading Stored Memories Installation DE LA PileEffacement de la Mémoire Clearing Memory Durée DE VIE DES PilesGarantie / Réparation Annexe Principe DE Fonctionnement DU BaromètrePrévisions Météo QUÉ Significan LOS Botones ADJ SpanishNuevas Configuraciones New Settings Cómo SE Configura EL TiempoAlarma Alarma de Temperatura Temperature AlarmModalidad de Cronómetro Stopwatch Mode Alarma de Altitud Altitude AlarmModalidad de Brújula Compass Mode Función de Señal Acústica Beep FunctionModalidad Nocturna Night Mode Configuración de la Declinación Declination SettingCalibración de la Brújula Compass Calibration LUZ DE Fondo AutomáticaModalidad de Barómetro Barometer Mode Indicador de Nivel Bajo de la Pila Low Battery IndicatorMuestreo Sampling Gráfica Barométrica Barometric GraphFunción de Memoria Memory Function Modalidad de Altímetro Altimeter ModeCómo SE Instalan LAS Pilas Cómo se Borra la Memoria Clearing MemoryVida Útil DE LA Pila Corrección DE AnormalidadesGarantía / Reparación Apéndice Cómo Funciona EL Pronosticador DEL TiempoPronóstico del Tiempo Erläuterung DER Tasten ADJ GermanNeue Einstellungen New Settings Datumseinstellung Date SettingsModus Alarmeinstellung Alarm Setting Mode Temperaturalarm Temperature AlarmModus Stoppuhr Stopwatch Mode Höhenalarm Altitude AlarmModus Kompass Compass Mode Piepfunktion Beep FunctionModus Zielpeilung Self Homing Mode Deklinationseinstellung Declination SettingNachtmodus Night Mode Kompasskalibrierung Compass CalibrationModus BarometerBarometer Mode Anzeige schwache Batterie Low Battery IndicatorModus Wetterprognose Weather Forecast Mode Symbole für die Wettervorhersage Weather Forecasting IconsSpeicherfunktion Memory Function Modus Höhenmessung Altimeter ModeEine Bezugshöhe Setzen Setting a Reference Altitude Hinweise ZUR Fehlerbeseitigung Speicher Löschen Clearing MemoryEinlegen Einer Batterie Batteriehaltbarkeit Wettervorhersage Anhang WIE DIE Wettervorhersage FunktioniertItalian Impostazione Della Data Modalità Data/Ora Predefinita / ImpostazioniNuove Impostazioni Modalità di Impostazione Dell’allarmeFunzione Bip Allarme AltitudineModalità Cronometro Modalità Cronometro / Funzione Tempo ParzialeImpostazione della Declinazione Indicatore di Esaurimento della PilaModalità Radiobussola Modalità NotteCancellazione delle Letture Barometriche Precedenti Diagramma BarometricoModalità Previsioni Meteorologiche Icone delle Previsioni MeteorologicheImpostazione di Un’altitudine di Riferimento Cancellazione della MemoriaFunzione di Memoria Lettura dei Valori MemorizzatiPressione Assoluta / mbar Condizioni del Tempo Previsioni MeteorologicheGaranzia Limitata PER DUE Anni Light LUZ Tela de LCD Nível de BússolaNovas Configurações Modo de Horário Padrão / Configurações do HorárioModo de Configuração do Alarme Alarme de TemperaturaFunção de Bip Alarme de AltitudeModo de Cronômetro Modo de Cronômetro / Função de Divisão de TempoCalibragem da Bússola Configuração de DeclinaçãoModo de Orientação Automática Modo NoturnoModo de Previsão do Tempo Modo de BarômetroÍcones de Previsão do Tempo Unidades Barométricas e de TemperaturaComo Estabelecer uma Altitude de Referência Modo de AltímetroFunção de Memória Leitura das Memórias ArmazenadasComo Limpar a Memória Pressão absoluta / mbar Condição do tempo Previsão do Tempo

70-0102 specifications

The Bushnell 70-0102 is a versatile pair of binoculars designed for outdoor enthusiasts and nature lovers who require high-quality optics for a variety of applications. One of the standout features of the Bushnell 70-0102 is its impressive 10x magnification, allowing users to see distant subjects in great detail. This level of magnification is ideal for birdwatching, wildlife observation, or sports events, where clarity and distance are crucial.

The binoculars come equipped with a 42mm objective lens, which contributes to bright and clear images, even in low-light conditions. This is particularly beneficial for early morning or late afternoon excursions. The large lens diameter enables a wider field of view, allowing users to scan landscapes or follow moving subjects with ease.

Bushnell’s 70-0102 binoculars feature fully multi-coated optics, which significantly enhance light transmission and image quality. This technology ensures that users experience bright, sharp colors and improved contrast in their viewing experiences. The prisms utilized in the Bushnell 70-0102 are made of BaK-4 glass, a material known for its superior light-gathering ability, which minimizes light loss and enhances overall performance.

In terms of durability, the Bushnell 70-0102 binoculars are designed to withstand the rigors of outdoor use. They are encased in a rugged rubber armor, providing a non-slip grip and extra protection against shocks and impacts. Furthermore, these binoculars are also waterproof and fog proof, thanks to their nitrogen-purged construction. This means users can confidently use the binoculars in various weather conditions without worrying about internal moisture or damage.

The Bushnell 70-0102 is user-friendly, featuring a comfortable and adjustable eyecup system that accommodates both eyeglass wearers and those without. The twist-up eyecups allow for optimal eye relief, ensuring that every user can enjoy a full field of view.

Overall, the Bushnell 70-0102 binoculars combine powerful magnification, quality optics, and durable construction, making them an excellent choice for anyone looking to explore the great outdoors. With their user-centric design and advanced optical technologies, these binoculars provide an exceptional viewing experience, whether you're in the field, at a game, or simply enjoying nature.
Top Page Image Contents