setting). For reduced speed, choose setting 1 (soft setting).
•The «smartlight» comes on instantly and shines as long as the appliance is switched on. It reproduces an almost daylight condition, thus revealing even the finest hair and giving you a better control for improved epilation efficiency.
2How to guide the appliance
•Always stretch your skin when epilating.
•Always make sure that the epilation area between the massaging rollers is in contact with your skin.
•The pivoting caps automatically adapt to the contour of your skin.
•Guide the appliance in a slow, continu- ous movement without pressure against the hair growth, in the direction of the switch. As hair can grow in different directions, it may also be helpful to guide the appliance in different direc- tions to achieve optimum results. The pulsating movement of the massaging rollers stimulate and relax the skin for a gentler epilation.
•If you are used to the sensation of epilation and prefer a faster way of removing hair, attach the Efficiency cap (1b) replacing the massage system (1a).
3Leg epilation
Epilate your legs from the lower leg in an upward direction. When epilating behind the knee, keep the leg stretched out straight.
4Underarm and bikini line epilation Please be aware that especially at the beginning, these areas are particularly sensitive to pain. With repeated usage the pain sensation will diminish. For more
comfort, ensure that the hair is at the optimum length of
Before epilating, thoroughly clean the respective area to remove residues (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. As skin may be more sensitive directly after epilation, avoid using irritating substances such as deo- dorants with alcohol.
Cleaning the epilation head
Before cleaning, unplug the appliance. Regular cleaning ensures better performance.
Brush cleaning:
5Remove the cap and brush it out.
6Thoroughly clean the tweezers from the rear side of the epilator head with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head.
Cleaning under running water:
7Remove the cap. Hold the appliance with the epilation head under running water. Then press the release button (5) to remove the epilation head (2).
Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Leave both parts to dry. Before reattaching, make sure that they are completely dry.
B Using the shaver head attachment
aOptiTrim comb
bShaver foil
cTrimmer
14