Oregon Scientific RMR202 Sensor Data Transmission, Clock Clock Reception, Manually SET Clock

EN

NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:

Press and hold + MODE.

The sensor reception icon in the remote sensor area shows the status:

ICON	DESCRIPTION
	Main unit is searching for
	sensor(s).
	A channel has been found.

The sensor cannot be found.

TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock

automatically with a clock signal.

4

RMR202:

Slide EU / UK to select the signal received.

•EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany.

•UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England.

RMR202A:

•WWVB-60 signal: within 3200km (2000 miles) of Fort Collins Colorado.

To enable / disable signal reception:

Press and hold to enable or to disable signal reception.

NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold to force another signal search.

Clock signal reception indicator:

STRONG	WEAK	NO SIGNAL
SIGNAL	SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception first.

1.Press and hold MODE.

2.Press or to change the settings.

3.Press MODE to confirm.

4.The settings order is: time zone, 12/24 hr format,