Appendix A: UBA parameters (Tivoli Netcool/Proviso v4.4.3 and later)
VOIP_CISCO_IPT_PERFMON.INPUT_USE_SECURE_FTP
Description
Acquire CUCM Perfmon Bulk input files using secure FTP.
Component
UBA
Value
Default: false
Attribute: Writable
Location: Properties tab
Detail
The INPUT_USE_SECURE_FTP parameter specifies whether FTP (File Transfer Protocol) or SFTP (secure FTP) is used. To use FTP, specify the value false. Otherwise, to use SFTP, specify the value true. The default value is false.
To use the sftp command, you must have an SSH client installed on the servers where the Bulk input files reside and where the DataChannel is running. Typically, an SSH client is installed by default on most Unix systems. For more information, see your operating system documentation or the sftp manpage.
Note: You cannot do the following:
•Use an FTP client to connect to an SFTP server
•Connect to an FTP server with a client that supports only SFTP
86 | IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack |