IBM R2E2 manual Request

Chapter 4: Configuring the technology pack

Field Description

ftp.user	User ID required for login to the DataChannel host that issued the SOAP
	request.
	Example: ftp.user=provisouser
grace_period	The time, in milliseconds, to subtract from the polling start time. The
	polling start time is the time that the ProvisoCUCM instance begins polling
	the CUCM server for data.
	The grace period is intended to help you avoid missing data files that the
	CUCM has not yet written for the current time period.
	ProvisoCUCM uses the polling start time specified in the field
	start_time of the file cucm.TIMESTAMP. This file is located in the same
	directory as the cucm.properties file.
	If the file does not exist when ProvisoCUCM is instantiated, it starts polling
	the CUCM server immediately, creates cucm.TIMESTAMP, and writes the
	current time to it.
	Example grace period (100 seconds): grace_period=100000
	Example start time (1/20/2009 at 12:00): start_time=1232470820931
perfmon.hostN.hostname	The name of one of the multiple hosts on which Perfmon data is collected.
	Example (host1): perfmon.host1.hostname = host1.example.zz
	Example (host2): perfmon.host2.hostname = host2.example.zz
perfmon.hostN.pass	The password to access one of the multiple hosts on which Perfmon data is
	collected.
	Example (host1): perfmon.host1.pass = pass
	Example (host2): perfmon.host2.pass = pass
perfmon.hostN.port	The port number on one of the multiple hosts on which Perfmon data is
	collected.
	Example (host1): perfmon.host1.port = 443
	Example (host2): perfmon.host2.port = 443
perfmon.hostN.user	The user name to access one of the multiple hosts on which Perfmon data is
	collected.
	Example (host1): perfmon.host1.user = admin
	Example (host2): perfmon.host2.user = admin
perfmon_interval	The interval, in milliseconds, at which ProvisoCUCM polls the CUCM
	server for Perfmon data files, and checks perfmon_output_dir for data
	files pushed there by the CUCM server.
	Example (5 minutes): run_interval=300000
perfmon_output_dir	The location on the DataChannel host where the ProvisoCUCM instance
	generates output, in CSV format, from a Perfmon data file.
	Example: perfmon_output_dir=/opt/uba/perfmon

52 IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack