Cortelco 2750 instruction manual To Change the Privacy Setting, Dialing Mode, Area Codes

Page 23

2.9.1.To Change the Privacy Setting

At Station #01:

a.Press MENU. The display will read “Phone Setting”

b.Press the DOWN ARROW repeatedly until “Advanced Setting” appears in the display.

c.Press the soft key under ENTER.

d.Press DOWN ARROW repeatedly until “System Privacy” appears in the display.

e.Press the soft key under ENTER. The display will show the current Call Privacy setting.

f.Press the soft key under CHANGE repeatedly, until the desired call privacy setting is displayed.

g.Press MENU to exit.

Note: Even with Call Privacy set to ON, you will still be able to turn Call Privacy off during a call by pressing the CONFERENCE button. There is always call privacy on intercom calls regardless of your system call privacy selection. People at other stations cannot listen in to your intercom conversations.

2.10.Dialing Mode

The Tone or Pulse dialing selection is made at Station #01 for the entire system. If any of your telephone lines have Pulse Service, you must select Pulse Dialing. If all your lines have Tone Service, leave the setting at Tone Dialing.

At Station #01:

a.Press MENU. The display will read “Phone Setting”

b.Press the soft key under DOWN ARROW repeatedly until “Advanced Setting” appears in the display.

c.Press the soft key under ENTER.

d.Press the DOWN ARROW repeatedly until “Tone/Pulse” appears in the display. The display will show the current tone/pulse setting.

e.Press the soft key under CHANGE repeatedly, to select either TONE or PULSE dialing.

f.Press MENU to exit.

Note: If your system is set to Pulse Dialing, you may press the * button to change the dialing mode temporarily to tone during a call. This feature is useful for access to telephone banking, long distance or other special services. Dialing mode will revert to pulse when you hang up.

2.11.Area Codes

There are three sets of Area Codes that you may set.

The first is your Home Area Code. You may enter the Home Area Code so that telephone numbers are properly displayed. This enables you to dial numbers in the caller list without pressing the “SELECT” button first You may enter one Home Area Code. After you program your home area code, the screen will display only seven digits when you receive a call from within this area code. Only those seven digits will be dialed out.

The second is the Local Area Codes. These six Local Area Codes are for calls that require you to dial the area code plus seven digits, but without the “1” in front.

The third set of area codes are the 1 Plus 7. You may enter up to six “1 PLUS 7” area codes. These area codes are for calls that require you to dial a “1” plus the seven digits, but without the area code.

17

2750 User Guide Version 1.3

Page 22 Page 24
Image 23
Page 22 Page 24
Contents OWNER’S Instruction Manual Table of Contents Memory Settings Iii User Guide Version Using Your Telephones Answering System Using Stanard Telephones Thank YOU For Purchasing Feature List User Guide Version Important Safety Instructions Box Contents Unpacking and InstallationTelephone Part Identification Installations with Private Lines and Unconnected Lines Identify Your Existing Wiring SystemPlan Your Installation Standard InstallationConnect Cords to Telephone Install Batteries OptionalAssign a Station Number Station Name Assignment Verify Proper InstallationSystem Programming Station Number AssignmentLine Configuration/Type To Set Loop Voltage Detector To Set Connections/ConfigurationLoop Voltage Detector To choose how each line will ring Ringer ConfigurationSetting Distinctive Ringing To choose how your phone will respond to intercom calls Setting Off-Hook RingingIntercom Call Response Toll Restriction To set the system’s toll restriction access codeAutomatic Line Selection To Set Automatic Line SelectionRestricted To completely restrict specific lines at a telephoneSystem Privacy To set the allowed numbers at a particular telephoneArea Codes To Change the Privacy SettingDialing Mode Memory Settings To Store the Centrex Prefix Storing a Caller ID number into memoryTo store a personal directory dial number To Store Caller ID RecordsErase Toll Restrictions Erase All Feature SettingsReset Default Settings Erase Numbers Stored in MemoryMiscellaneous Settings Hold Call Reminder Adjusting Auto Hold Drop TimeAdjusting Flash Timer Caller ID on Call Waiting Cidcw SensitivityAnswering System New Message Beep Setting Your Telephones Pickup DelaySetting Toll Saver Changing your OGMAuto-Attendant Setting Message LengthRemote Code Record your Auto Attendant Night OGM Set up the Auto AttendantRecord your Auto Attendant Day OGM Record your Auto Attendant Zero-Out OGM Setting Auto Attendant Pickup DelayNight Timer Set To record additional Auto Attendant OGM Setting More Than One Phone as an Auto AttendantUsing Additional Auto Attendant OGMs Setting Separate Auto Attendant OGMs for Different LinesLeave a Message at the Auto Attendant All Transfer FeatureTurn Off the Auto Attendant on One or More Lines Choosing the Zero-Out ActionSummary of Auto Attendant Actions Transfer Direct to Voice MailTelephone Operation Outside Call with Intercom Station Answering a call on another lineConference Outside CallsCaller ID Blind TransferTransfer Ring Personal RingRinger Volume LevelsDialing Calls Deleting NumbersIntercom Speaker Accessing MessagesResetting MSG Lamp SpeakerphoneLine Reserve FlashMute Do Not Disturb DNDToll Restriction Removal Single Station Timer Elapsed Call TimeCall Privacy Toll Restriction Removal Single CallDirectory Card Timer ResetElapsed Call Time Previous Calls HeadsetIntercom Voice Intercom while IdleIntercom while on an Outside Call Answering Intercom Calls Intercom RingRoom Monitoring AllAnswering Pages Single Blocking PagesPause Message Playback Using Your Telephones Answering SystemListening to your Messages Play Messages Stop Message PlaybackJump back Using Dial PadRepeat a Message Skip to the next MessageRecording a Telephone Conversation Erasing Messages To Erase a MessageTo Erase All Messages Recording a Memo or ConversationIntercom Using Stanard TelephonesTo Repeat an Auto Attendant OGM Line Status and Calls on HoldBatteries Battery ReplacementPower Failure Operation Menu Tree Phone SettingsAppendix a ON/OFF Menu Options SUB Menu Default Answer SettingsAdvanced Settings Memory SettingsTime and Date Settings Appendix B Installation WorksheetToll Restriction Worksheet Appendix CAppendix D Trouble Shooting GuideFCC Information Telephone Repair Repair Center Sawyer Road Corinth, Mississippi Limited Warranty
Top Page Image Contents