Cortelco 2750 Using Stanard Telephones, To Repeat an Auto Attendant OGM, Intercom

Page 50

7.3.To Repeat an Auto Attendant OGM

While listening to an Auto Attendant OGM, the caller can press “9” to repeat the main menu. You may want to include the phrase “ to repeat this message, dial 9”. If you have recorded AA OGM 2 – 8 messages, they can be repeated by dialing the number of the message again.

8.USING STANARD TELEPHONES

You may also use standard (non-2750/2740) telephones in conjunction with your 2750 telephones. All features of the non-2750 telephones will operate normally. However, they will not be able to share the features of the 2750 telephones.

8.1.Line Status and Calls on Hold

The line status indicators of the 2750 phones will recognize standard telephones. When a call is placed on hold at a 2750 telephone, it can be taken off hold at a standard telephone.

Note: If the line status indicators of your 2750 telephones do not function properly, follow the instructions for setting the loop voltage detector in Section 2.4.

8.2.Call Privacy

Call privacy is not observed by non-2750 telephones. A non-2750 telephone on any line has access to that line at any time, whether or not it is being used by a 2750 telephone.

8.3.Intercom

Non-2750 telephones cannot use the intercom feature to communicate with 2750 telephones.

8.4.Fax Machines and Modems

You may connect modems or fax machines to any of your lines, and the line indicators of the 2750 telephones will light when these devices are using a line.

44	2750 User Guide Version 1.3

Image 50

Contents OWNER’S Instruction Manual Table of Contents Memory Settings Iii User Guide Version Using Your Telephones Answering System Using Stanard Telephones Thank YOU For Purchasing Feature List User Guide Version Important Safety Instructions Unpacking and Installation Box ContentsTelephone Part Identification Standard Installation Identify Your Existing Wiring SystemPlan Your Installation Installations with Private Lines and Unconnected LinesConnect Cords to Telephone Install Batteries OptionalAssign a Station Number Station Number Assignment Verify Proper InstallationSystem Programming Station Name AssignmentLine Configuration/Type To Set Loop Voltage Detector To Set Connections/ConfigurationLoop Voltage Detector To choose how each line will ring Ringer ConfigurationSetting Distinctive Ringing To choose how your phone will respond to intercom calls Setting Off-Hook RingingIntercom Call Response To Set Automatic Line Selection To set the system’s toll restriction access codeAutomatic Line Selection Toll RestrictionTo completely restrict specific lines at a telephone RestrictedTo set the allowed numbers at a particular telephone System PrivacyArea Codes To Change the Privacy SettingDialing Mode Memory Settings To Store Caller ID Records Storing a Caller ID number into memoryTo store a personal directory dial number To Store the Centrex PrefixErase Numbers Stored in Memory Erase All Feature SettingsReset Default Settings Erase Toll RestrictionsMiscellaneous Settings Caller ID on Call Waiting Cidcw Sensitivity Adjusting Auto Hold Drop TimeAdjusting Flash Timer Hold Call ReminderAnswering System Changing your OGM Setting Your Telephones Pickup DelaySetting Toll Saver New Message BeepAuto-Attendant Setting Message LengthRemote Code Record your Auto Attendant Night OGM Set up the Auto AttendantRecord your Auto Attendant Day OGM Record your Auto Attendant Zero-Out OGM Setting Auto Attendant Pickup DelayNight Timer Set Setting Separate Auto Attendant OGMs for Different Lines Setting More Than One Phone as an Auto AttendantUsing Additional Auto Attendant OGMs To record additional Auto Attendant OGMChoosing the Zero-Out Action All Transfer FeatureTurn Off the Auto Attendant on One or More Lines Leave a Message at the Auto AttendantTransfer Direct to Voice Mail Summary of Auto Attendant ActionsTelephone Operation Outside Calls Answering a call on another lineConference Outside Call with Intercom StationPersonal Ring Blind TransferTransfer Ring Caller IDDeleting Numbers Volume LevelsDialing Calls RingerSpeakerphone Accessing MessagesResetting MSG Lamp Intercom SpeakerDo Not Disturb DND FlashMute Line ReserveToll Restriction Removal Single Call Timer Elapsed Call TimeCall Privacy Toll Restriction Removal Single StationHeadset Timer ResetElapsed Call Time Previous Calls Directory CardAnswering Intercom Calls Intercom Ring Intercom while IdleIntercom while on an Outside Call Intercom VoiceBlocking Pages AllAnswering Pages Single Room MonitoringStop Message Playback Using Your Telephones Answering SystemListening to your Messages Play Messages Pause Message PlaybackSkip to the next Message Using Dial PadRepeat a Message Jump backRecording a Memo or Conversation Erasing Messages To Erase a MessageTo Erase All Messages Recording a Telephone ConversationLine Status and Calls on Hold Using Stanard TelephonesTo Repeat an Auto Attendant OGM IntercomBatteries Battery ReplacementPower Failure Operation Menu Tree Phone SettingsAppendix a ON/OFF Answer Settings Menu Options SUB Menu DefaultAdvanced Settings Memory SettingsTime and Date Settings Installation Worksheet Appendix BAppendix C Toll Restriction WorksheetTrouble Shooting Guide Appendix DFCC Information Telephone Repair Limited Warranty Repair Center Sawyer Road Corinth, Mississippi