Cortelco 2750 instruction manual All, Answering Pages Single, Blocking Pages, Room Monitoring

Page 46

6.21.2.All Page

The All Page feature enables you to make announcements through all of the other 2750/2740 stations. When you make an All Page, your announcement, preceded by a double paging alert tone, will be heard at all the phones that are not in use and do not have their DO NOT DISTURB or BLOCK PAGE activated. To perform an All Page:

a.Press PAGE twice.

b.After you hear the paging tone, speak towards the telephone or lift the handset and make your announcement.

6.21.3.Answering Pages

6.21.3.1.Single Page

A page directed to a particular station may be answered only at that station. Lift the handset, press SPEAKER, HEADSET, or the flashing INTCM button. You will then be connected to the caller in a private intercom conversation. Replace the handset in the cradle or press the SPEAKER or HEADSET button to hang up.

6.21.3.2.All Page

An All Page may be answered from any phone in the system, even one that is busy on an outside line, has DO NOT DISTURB set or has blocked pages. You may answer an All Page by pressing the flashing INTCM button. You will then be connected to the caller in a private intercom conversation.

6.21.4.Blocking Pages

Pages may be blocked at any telephone in the system.. When pages are blocked, no pages will be heard on that telephone. Also, the person attempting to page the telephone will hear a no action tone.

To block pages at your telephone:

a.Press MENU. The display will read Phone Setting

b.Press the soft key under ENTER.

c.Press the Down Arrow repeatedly until Intercom Prefs appears in the display.

d.Press the soft key under ENTER.

e.Press DOWN ARROW repeatedly until Pages: Allowed appears in the display.

fPress the soft key under CHANGE to select between Pages ALLOWED and Pages BLOCKED.

g.Press MENU to exit.

6.22.Room Monitoring

The Room Monitoring feature allows you to activate the speakerphone of another station to monitor sounds in that room. This feature is especially useful in a nursery or home office where there are children present.

Place an intercom call to telephone you wish to monitor. Press MUTE if you want to prevent sounds in your room from being heard at the monitored phone.

To end monitoring, hang up the handset or press SPEAKER. The remote station will disconnect immediately.

Note: The remote phone must be set to Intercom HANDSFREE.

40

2750 User Guide Version 1.3

Image 46
Contents OWNER’S Instruction Manual Table of Contents Memory Settings Iii User Guide Version Using Your Telephones Answering System Using Stanard Telephones Thank YOU For Purchasing Feature List User Guide Version Important Safety Instructions Unpacking and Installation Box ContentsTelephone Part Identification Standard Installation Identify Your Existing Wiring SystemPlan Your Installation Installations with Private Lines and Unconnected LinesAssign a Station Number Install Batteries OptionalConnect Cords to Telephone Station Number Assignment Verify Proper InstallationSystem Programming Station Name AssignmentLine Configuration/Type Loop Voltage Detector To Set Connections/ConfigurationTo Set Loop Voltage Detector Setting Distinctive Ringing Ringer ConfigurationTo choose how each line will ring Intercom Call Response Setting Off-Hook RingingTo choose how your phone will respond to intercom calls To Set Automatic Line Selection To set the system’s toll restriction access codeAutomatic Line Selection Toll RestrictionTo completely restrict specific lines at a telephone RestrictedTo set the allowed numbers at a particular telephone System PrivacyDialing Mode To Change the Privacy SettingArea Codes Memory Settings To Store Caller ID Records Storing a Caller ID number into memoryTo store a personal directory dial number To Store the Centrex PrefixErase Numbers Stored in Memory Erase All Feature SettingsReset Default Settings Erase Toll RestrictionsMiscellaneous Settings Caller ID on Call Waiting Cidcw Sensitivity Adjusting Auto Hold Drop TimeAdjusting Flash Timer Hold Call ReminderAnswering System Changing your OGM Setting Your Telephones Pickup DelaySetting Toll Saver New Message BeepRemote Code Setting Message LengthAuto-Attendant Record your Auto Attendant Day OGM Set up the Auto AttendantRecord your Auto Attendant Night OGM Night Timer Set Setting Auto Attendant Pickup DelayRecord your Auto Attendant Zero-Out OGM Setting Separate Auto Attendant OGMs for Different Lines Setting More Than One Phone as an Auto AttendantUsing Additional Auto Attendant OGMs To record additional Auto Attendant OGMChoosing the Zero-Out Action All Transfer FeatureTurn Off the Auto Attendant on One or More Lines Leave a Message at the Auto AttendantTransfer Direct to Voice Mail Summary of Auto Attendant ActionsTelephone Operation Outside Calls Answering a call on another lineConference Outside Call with Intercom StationPersonal Ring Blind TransferTransfer Ring Caller IDDeleting Numbers Volume LevelsDialing Calls RingerSpeakerphone Accessing MessagesResetting MSG Lamp Intercom SpeakerDo Not Disturb DND FlashMute Line ReserveToll Restriction Removal Single Call Timer Elapsed Call TimeCall Privacy Toll Restriction Removal Single StationHeadset Timer ResetElapsed Call Time Previous Calls Directory CardAnswering Intercom Calls Intercom Ring Intercom while IdleIntercom while on an Outside Call Intercom VoiceBlocking Pages AllAnswering Pages Single Room MonitoringStop Message Playback Using Your Telephones Answering SystemListening to your Messages Play Messages Pause Message PlaybackSkip to the next Message Using Dial PadRepeat a Message Jump backRecording a Memo or Conversation Erasing Messages To Erase a MessageTo Erase All Messages Recording a Telephone ConversationLine Status and Calls on Hold Using Stanard TelephonesTo Repeat an Auto Attendant OGM IntercomPower Failure Operation Battery ReplacementBatteries Appendix a Phone SettingsMenu Tree ON/OFF Answer Settings Menu Options SUB Menu DefaultTime and Date Settings Memory SettingsAdvanced Settings Installation Worksheet Appendix BAppendix C Toll Restriction WorksheetTrouble Shooting Guide Appendix DFCC Information Telephone Repair Limited Warranty Repair Center Sawyer Road Corinth, Mississippi