Xantrex Technology 809-0912 manual To change the Mode from the Device Status screen, Operating

Page 23

FSequence IPM Owners Guide.book Page 13 Thursday, October 6, 2011 3:33 PM

Basic Configuration Settings

Mode

The Freedom Sequence operates in two modes: Operating or Standby.

When set to Operating mode, Freedom Sequence performs the normal function of controlling the AC and DC loads on the system. In this mode, all the status information of the Freedom Sequence can be accessed via the Xanbus System Control Panel (SCP) and a limited number of configuration settings can be changed as shown in “Freedom Sequence Basic Configuration Screen” on page 11.

Freedom Sequence can be set to Standby mode to stop it from controlling the AC and DC loads on the system. When this mode is selected, Freedom Sequence allows accessibility to change all the configuration on the Freedom Sequence, including restoring to OEM default settings1.

When Freedom Sequence is first powered up, it will start operation in Operating mode.

To change the Mode from the Device Status screen:

FSPM 00: StatusFSPM 00: Config

L2 Amps	On 0.0A	Mode	[Operating]
Batt Voltage	12.8V	SHR BKR Mode	[Auto]
Circuit Status		SHR BKR Rating	[30.0A]
Config		Circuit Config
2 Press to select	1 Press down until the	3 Press to change
Config.	field is selected.	the setting.
FSPM 00: Config		FSPM 00: Config
Mode	[*Operating]	Mode	[Standby]
SHR BKR Mode	[Auto]	SHR BKR Mode	[Auto]
SHR BKR Rating	[30.0A]	SHR BKR Rating	[30.0A]
Circuit Config		Circuit Config

4 Press to select a

5 Press to confirm

new value.

the new value.

FSPM 00: Config

Mode

[Standby]

SHR BKR Mode

[Auto]

SHR BKR Rating

[30.0A]

Circuit Config

1.OEM default settings (the “OEM Profile”) are programmed by the Original Equipment Manufac-

turer. The OEM profile is available and can be accessed and modified via the XDT only.

975-0593-01-01

13

Image 23

Contents Freedom Sequence Page Contact Information Purpose Conventions Used About This GuideRelated Information Reference Important Safety InstructionsExplosion Hazard Precautions When Placing the Power ManagerFCC Information to the User Risk of Damage to the Power ManagerContents Page Introduction Standard FeaturesMaterial List Product/Accessory Product Number Compatible Products and Accessories1Xanbus System Typical Xanbus System DiagramPorts and Terminals Mechanical FeaturesTypical RV Wiring Diagram With Freedom Sequence Typical RV WiringEnterFunc Power Manager ConfigurationPower Manager Configuration Cont Circuit StatusCircuit Status Circuit Status Config Basic Configuration SettingsList of configurable settings includes Priority List of circuit configurable settings includesCircuit Config Operating To change the Mode from the Device Status screenMode ModeManual Shore Breaker ModeSHR BKR Mode Auto25.0A Breaker RatingsShore Breaker Rating 30.0ARestore Defaults Restore DefaultsTo Restore Defaults from the Device Status screen Circuit Priority Circuit ConfigurationConfig Circuit Config Circuit Config To change the priority setting from the Device Status screenLoad Shed EnabledLoad Shed To change the Load Shed from the Device Status screenImproper Configuration DUE to Lack of Experience Advanced SettingsBKR Derating List of advanced settings includeAdvanced Settings Breaker Derating Config Advanced SettingsScreen Generator Warmup DelayGEN Warmup Delay Generator Breaker Rating10sec Connect Sequence DelayConnect Seq Delay AC Disc Priority AC Disqualification Priority12.0V DC Voltage SettingNom DC Voltage Circuit Name Circuit Level Advanced SettingsCircuit2 DC Relay Settings AC Relay SettingsCircuit3 Circuit NameAC Line Circuit TypeGenerator Soft Start PriorityReconnect Margin Battery Voltage TriggersLoading of Shore/Generator Breaker Ratings Freedom Sequence Operational ConceptsAuto-Detection of AC Input Source Shore/Gen Auto-Detection of AC Input Source Type 1-Ph/2-PhAC Load Shedding LINE1 L1 LINE2 L2 DC Load Shedding Using DC Relay to control AC load circuitsPriority Swapping Between Circuits Override the AC Circuit Load Shedding Freedom SW Interactive Charger De-rating ICD Battery Voltage MeasurementGenerator Run Detection B+ Signal Freedom Sequence Interaction with Other Xanbus DevicesFreedom Sequence SCP Menu Map Specifications Warranty Warranty and Return InformationWarranty and Return Information Product DisclaimerReturn Procedure Return Material Authorization PolicyOut of Warranty Service Information About Your System Page Xantrex Technology USA Inc