FSequence IPM Owners Guide.book Page 11 Thursday, October 6, 2011 3:33 PM
Basic Configuration Settings
Complete list of circuit configuration items.
FSPM 00: Status |
|
|
| FSPM 00: Config |
| ||||
L2 Amps | On 0.0A |
|
| Mode |
|
| [Operating] | ||
Batt Voltage | 12.8V |
|
| SHR | BKR | Mode | [Auto] | ||
Circuit Status |
|
|
| SHR | BKR | Rating | [30.0A] | ||
|
|
| |||||||
Config |
|
|
|
| Circuit | Config |
| ||
|
|
|
|
|
|
|
|
|
|
Enter | Func | Enter | Func |
FSPM 00: Config
Mode |
| [Operating] | |
SHR | BKR | Mode | [Auto] |
SHR | BKR | Rating | [30.0A] |
Circuit | Config |
| |
Restore | Defaults |
21
From the Device Status screen, scroll down (1) until Config is highlighted then, press Enter (2) to bring up the basic Configuration screen.
4 3
To activate a specific configuration setting, move through each item using the Up and Down buttons (3). When a selection is made, press the Enter button (4) to activate the highlighted configuration setting.
NOTE: Use the Func button to exit out of each screen.
Figure 8 Freedom Sequence Basic Configuration Screen
List of configurable settings includes:
1.Mode – can be set to Operating or Standby.
2.SHR BKR Mode – shore breaker mode can be set to Auto or Manual.
3.SHR BKR Rating – shore breaker rating sets the breaker amperage.
4.Circuit Config – brings up the Circuit Config screen. See next page.
5.Restore Defaults loads back the OEM settings for all basic configuration and advanced settings.
|
| 11 |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|