FSequence IPM Owners Guide.book Page 14 Thursday, October 6, 2011 3:33 PM
Basic Configuration Settings
Shore Breaker Mode
Shore breaker setting can be set to Auto or Manual.
When set to Auto, the Freedom Sequence is capable of automatically detecting the type of AC source
When the shore breaker mode is set to Manual, the shore breaker rating can be modified and set between 5 to 50 amps.
By default, the setting for Shore Breaker Mode is Auto.
To change the shore breaker mode from the Device Status screen:
FSPM 00: StatusFSPM 00: Config
L2 Amps | On 0.0A | Mode | [Operating] |
Batt Voltage | 12.8V | SHR BKR Mode | [Auto] |
Circuit Status |
| SHR BKR Rating | [30.0A] |
Config |
| Circuit Config |
|
2 Press to select | 1 Press down until the | 4 Press to change | 3 Scroll down. |
Config. | field is selected. | the setting. |
|
FSPM 00: Config |
| FSPM 00: Config |
|
Mode | [Operating] | Mode | [Operating] |
SHR BKR Mode | [*Auto] | SHR BKR Mode | [Manual] |
SHR BKR Rating | [30.0A] | SHR BKR Rating | [30.0A] |
GEN BKR Rating |
| Circuit Config |
|
| 5 Press to select a | 6 Press to confirm | |
| new value. | the new value. | |
|
|
|
|
FSPM 00: Config |
|
| |
Mode | [Operating] |
| |
SHR BKR Mode |
| [Manual] |
|
SHR BKR Rating | [30.0A] |
| |
Circuit Config |
|
| |
|
|
|
|
|
| 14 |
| Freedom Sequence Intelligent Power Manager Owner’s Guide |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|