FSequence IPM Owners Guide.book Page iv Thursday, October 6, 2011 3:33 PM
Important Safety Instructions
IMPORTANT: READ AND SAVE THIS OWNER’S GUIDE FOR FUTURE
REFERENCE.
This chapter contains important safety instructions when operating the Freedom Sequence Intelligent Power Manager. Each time, before using the Freedom Sequence Intelligent Power Manager, READ ALL instructions and cautionary markings on or provided with the power manager and all appropriate sections of this guide.
NOTE: The Freedom Sequence Intelligent Power Manager contains no user- serviceable parts. For obtaining service, see “Warranty and Return Information” on page 41 for guidance.
NOTE: The Freedom Sequence Intelligent Power Manager must be provided with grounding conductors connected to the AC input/output connections.
ELECTRICAL SHOCK HAZARD
•Do not expose the power manager to rain, snow, spray, or bilge water.
•Do not operate the power manager if it has received a sharp blow, been dropped, has cracks or openings in the enclosure, or will not close, or otherwise damaged in any other way.
•Do not disassemble the power manager.
•Disconnect both AC and DC power from the power manager before attempting any maintenance or cleaning or working on any circuits connected to the power manager. See note below.
•Do not operate the power manager with damaged or substandard wiring. Make sure that all wiring is in good condition and is not undersized. Use copper conductors only.
Failure to follow these instructions will result in death or serious injury.
NOTE: The power manager has no on/off switch. Circuits are always live when DC and AC input are present.
|
| iv |
| Freedom Sequence Intelligent Power Manager Owner’s Guide |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|