Xantrex Technology 809-0912 manual Specifications

Page 51

FSequence IPM Owners Guide.book Page 41 Thursday, October 6, 2011 3:33 PM

Specifications

NOTE: Specifications are subject to change without prior notice.

Physical Specifications

Dimensions: L×W×H	254×355.6×63.5 mm (10×14×2.5 in.)
Weight	1 kg (2.2 lbs)
Xanbus ports	2
AC Main	1 set of split-phase pass-through terminals
	(L1, N, L2, G) accessible by removing the
	AC Main panel cover
AC relay terminal	6 pairs I/O terminal blocks - one pair for
blocks	each AC relay (PN: 809-0912)
	4 pairs I/O terminal blocks - one pair for
	each AC relay (PN: 809-0913)
DC auxiliary	4	(3-pin connector for each DC relay)
connector port	1	(2-pin connector for one B+ signal)
	1	(2-pin connector for battery)

Electrical Specifications

AC Main input voltage	120/240 VAC single/split phase

AC Main input current	Split phase: 50 AAC per phase
	Dual in phase: 30 AAC per phase

DC input voltage from	12/24 VDC
battery source

AC relay input voltage	120 VAC

AC relay input current	15 AAC per circuit

DC relays input voltage	12/24 VDC

DC relays input	5 ADC per circuit
current

Environmental Specifications

Regulatory Approvals

Operating range

–20 to 50 °C (– 4 to 122 °F)	Safety	UL 916,
		CSA C22.2 No. 205

	EMC	FCC Part 15, Class B

		975-0593-01-01		41

Image 51

Contents Freedom Sequence Page Contact Information Purpose Conventions Used About This GuideRelated Information Reference Important Safety InstructionsExplosion Hazard Precautions When Placing the Power ManagerFCC Information to the User Risk of Damage to the Power ManagerContents Page Introduction Standard FeaturesMaterial List Product/Accessory Product Number Compatible Products and Accessories1Xanbus System Typical Xanbus System DiagramPorts and Terminals Mechanical FeaturesTypical RV Wiring Diagram With Freedom Sequence Typical RV WiringEnterFunc Power Manager ConfigurationPower Manager Configuration Circuit Status Circuit StatusCont Circuit Status Basic Configuration Settings List of configurable settings includesConfig List of circuit configurable settings includes Circuit ConfigPriority Operating To change the Mode from the Device Status screenMode ModeManual Shore Breaker ModeSHR BKR Mode Auto25.0A Breaker RatingsShore Breaker Rating 30.0ARestore Defaults To Restore Defaults from the Device Status screenRestore Defaults Circuit Configuration Config CircuitCircuit Priority Config Circuit Config To change the priority setting from the Device Status screenLoad Shed EnabledLoad Shed To change the Load Shed from the Device Status screenImproper Configuration DUE to Lack of Experience Advanced SettingsList of advanced settings include Advanced SettingsBKR Derating Breaker Derating Config Advanced SettingsScreen Generator Warmup DelayGEN Warmup Delay Generator Breaker RatingConnect Sequence Delay Connect Seq Delay10sec AC Disc Priority AC Disqualification PriorityDC Voltage Setting Nom DC Voltage12.0V Circuit Level Advanced Settings Circuit2Circuit Name DC Relay Settings AC Relay SettingsCircuit3 Circuit NameAC Line Circuit TypeGenerator Soft Start PriorityReconnect Margin Battery Voltage TriggersLoading of Shore/Generator Breaker Ratings Freedom Sequence Operational ConceptsAuto-Detection of AC Input Source Shore/Gen Auto-Detection of AC Input Source Type 1-Ph/2-PhAC Load Shedding LINE1 L1 LINE2 L2 DC Load Shedding Using DC Relay to control AC load circuitsPriority Swapping Between Circuits Override the AC Circuit Load Shedding Freedom SW Interactive Charger De-rating ICD Battery Voltage MeasurementGenerator Run Detection B+ Signal Freedom Sequence Interaction with Other Xanbus DevicesFreedom Sequence SCP Menu Map Specifications Warranty Warranty and Return InformationWarranty and Return Information Product DisclaimerReturn Material Authorization Policy Out of Warranty ServiceReturn Procedure Information About Your System Page Xantrex Technology USA Inc