FSequence IPM Owners Guide.book Page 24 Thursday, October 6, 2011 3:33 PM
Advanced Settings
Connect Sequence Delay
The
By default, the factory setting is set to 10 seconds.
To change the Connect Seq Delay from the Advanced Settings screen:
FSPM 00: Status |
|
| FSPM 00: Status |
| |
L2 Amps | 0.0A |
| Batt Voltage | 12.8V | |
Batt Voltage | 12.8V |
| Circuit Status |
| |
Circuit Status |
|
| Config |
| |
Config |
|
|
| Advanced Settings |
|
|
|
|
|
|
|
1 Press all three buttons to | 3 Press button. | 2 Scroll down to select |
enable Advanced Settings. |
| Advanced Settings. |
FSPM 00: Advanced Settings
GEN BKR Rating | [30.0A] |
GEN Warmup Delay | [2sec] |
Connect Seq Delay | [10sec] |
AC Disc Priority | [2] |
5 Press to change | 4 Scroll down |
the setting. |
|
FSPM 00: Advanced Settings | |
GEN BKR Rating | [30.0A] |
GEN Warmup Delay | [2sec] |
Connect Seq Delay | [5sec] |
AC Disc Priority | [2] |
FSPM 00: Advanced Settings
GEN BKR | Rating | [30.0A] |
GEN Warmup Delay | [2sec] | |
Connect | Seq Delay | [*10sec] |
AC Disc | Priority | [2] |
7 Press to 6 Scroll up or down confirm the to choose a value. selected
value.
|
| 24 |
| Freedom Sequence Intelligent Power Manager Owner’s Guide |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|