Clarity CLS 45i Setting Up Caller ID, Enter Setup Mode, Setting Time and Date

Installing and Using Your CLS45i

Setting Up Caller ID

The Caller ID SETUP procedure begins only after the handset is fully charged.

Enter SETUP Mode

NOTE: In SETUP, if there is no input within 30 seconds, the program will default to the last selection in that mode (e.g., Language) and the CLS45i will return to Standby. If at any time you want to exit SETUP and return to Standby, press FLASH.

Press and hold CHANNEL for three seconds.

4.Press UP (s) or DOWN (t) to change the level.

5.Press INTERCOM to select your preference.

6.Press UP (s) or DOWN (t) to go to the next menu.

Setting Time and Date

The time-and-date stamp is automatically updated when the first incoming Caller ID is received.

The time will start from the default Time/Date “12:00 AM 01/01”.

Setting Language on the Handset

1.Press and hold CHANNEL for three

(3) seconds to enter the SETUP mode. The Caller ID display now reads, “SET LANGUAGE.”

2.Press INTERCOM once to enter the Language selection mode.The current selected language flashes.

3.Press UP (s) or DOWN (t) to scroll through the language options.The displayed language will change to “FRENCH” or “SPANISH.”

4.Press INTERCOM to select your preference.

5.Press UP (s) or DOWN (t) to go to the next menu.

Setting Contrast on the Handset

1.Press and hold CHANNEL for three (3) seconds to enter the SETUP mode.

2.Press UP (s) or DOWN (t) to go to the next menu.The display shows the last selection.

3.Press INTERCOM once to enter the Contrast Level selection mode.The current selected level flashes.

If the time setting is lost during a power out- age, the clock flashes when power is up again.

1.Press and hold CHANNEL for three (3) seconds to enter the SETUP mode.

2.Press UP (s) until the display reads, “TIME/ DATE”.

3.Press INTERCOM to start changing the date.The display shows the current time and date on the top line, e.g. “12:05AM 12/20” with the month digits flashing.

4.Press UP (s) or DOWN (t) to change the month digits.

5.Press INTERCOM once to select. After the month digits are set, the date digits flash.

6.Press UP (s) or DOWN (t) to change the date digits.

8.Press INTERCOM once to select. After the date digits are set, the hour digits flash.

9.Press UP (s) or DOWN (t) to change the hour digits.

10.Press INTERCOM once to select. After the hour digits are set, the minute digits flash.

11.Press UP (s) or DOWN (t) to change the minute digits.

10.Press INTERCOM once to select. After the

14