Installing and Using Your CLS45i
To maximize the battery charge, place the handset back into the cradle when not in use and each night.
When out of the cradle, the battery typically holds a charge for several days, depending upon use.
Maximizing Handset Battery Life
To maximize the battery life, fully discharge the battery and recharge it occasionally.
Simply unplug your telephone line cord from the wall telephone jack.
Press TALK and allow the handset to remain on for 10 to 14 hours.
Then, reconnect the phone cord to the wall telephone jack.
Return the handset to the base and allow it to fully charge for 12 hours.
Doing this process monthly reduces the memory buildup that occurs from frequent, partial charging.
Monitoring the Level of the
Backup Batteries in the Base
Chart 1
AC | No | Good | Low | LED |
Power | Battery | Battery | Battery | Color |
| installed |
|
|
|
yes |
| yes |
| green steady |
yes | yes |
|
| red steady |
yes |
|
| yes | blinks green/red |
no |
| yes |
| blinks red |
no |
|
| yes | blinks red, goes off |
Chart 1 indicates how to read the lights and indicators on the base to determine the status of the batteries and AC power.
Connecting Your
Telephone
Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have rotary dialing.
You may connect your telephone for desktop use or mounted on a wall.
•Raise the antenna on the base.
•Plug the other end of the telephone cord into the telephone wall jack.
•Plug the AC adapter into a standard 120V AC wall outlet.
Note: Use only with the #950 AC adapter supplied by Ameriphone.
CAUTION: Place the telephone and power cords where they will not interfere with movement, be dam- aged or create a fire or other electri- cal hazard.
12