Caller ID Functions
Deleting Selected Caller ID Information
1.While reviewing the Caller ID, press DELETE to delete the displayed caller information.The display flashes “ERASE ?”
2.Press INTERCOM to select.The display briefly reads “CID ERASED.” The next Caller ID entry appears automatically or the display reads, “- NO CALLS
Deleting All Caller ID
Information
1.While reviewing the Caller ID, hold down DELETE for two seconds.The display flashes “ERASE ALL ?”
2.Press INTERCOM to select.The display briefly reads “ALL CID” and “ERASED” and then “- NO CALLS
At any time, you can press FLASH one time to return to standby mode. Or it will return to standby automatically when 30 seconds has elapsed without any keys being pressed.
Saving Caller ID Information to Memory
1.While reviewing Caller ID, press MEM button.The display reads “SAVE TO” and “MEMO?”
2.Press INTERCOM to select.Then the display reads “ENTER MEMO” and “LOCATION.”
3.Enter location number [X] (0 through 9).
a.If the memory location [X] is empty, the display reads “SAVE AT” and “MEMO X?”
b.If the memory location [X] is not empty, display flashes “OVERWRITE” and “MEMO X?”
4.Press INTERCOM to select. Both the phone number (up to 16 digits) and caller’s name (12 characters) will be stored in that memory location. Or press FLASH to exit.
20