VTech DS6121-4 user manual Intercom, Model DS6121-2

Telephone operation

Intercom

The intercom feature allows conversation between two registered handsets of the same system.

Model DS6121-2

1.Press INT on the originating handset when the handset is not in use and its screen displays CALLING OTHER HANDSET.

2.The destination handset rings and its screen displays

OTHER HANDSET IS CALLING.

3.To answer the intercom call, press /FLASH, /SPEAKER, INT or any dialing key (0-9,#,*) on the destination handset.

4.To end an intercom call, press INT, OFF/CLEAR or place the handset back in the telephone base or charger.

Models DS6121-3/DS6121-4/DS6121-5/DS6122-5

1.Press INT on the originating handset when the handset is not in use. The screen displays INTERCOM TO:

2.Use the dialing keys to select the destination handset. The originating handset screen displays CALLING HANDSET X.

3.The destination handset rings and its screen displays

HANDSET X IS CALLING.

4.To answer the intercom call, press /FLASH, /SPEAKER, INT or any dialing key (0-9,#,*) on the destination handset.

5.To end an intercom call, press INT, OFF/CLEAR or place the handset back in the telephone base or charger.

CALLING

OTHER HANDSET

OTHER HANDSET

IS CALLING

INTERCOM TO:

CALLING

HANDSET X

HANDSET X

IS CALLING

•If the destination handset does not answer

the intercom call within 100 seconds, is in the directory, is in the call log, is on a call, or out of range, the originating handset screen will display

UNABLE TO CALL TRY AGAIN and return to idle mode.

BasicTelephoneoperation

www.vtechphones.com 15