VTech DS6121-4 user manual Transfer an external call, Flash OFF/CLEAR or INT

Telephone operation

Transfer an external call

You can transfer an external call from one handset to any other handset.

Model DS6121-2

1.	During a call, press INT to put the call on hold at the	CALLING
	originating handset. Its screen displays CALLING
		OTHER HANDSET
	OTHER HANDSET.
2.	The destination handset rings and its screen displays
	OTHER HANDSET IS CALLING.
		OTHER HANDSET
3.	To answer the call at the destination handset, press
		IS CALLING
	/FLASH, /SPEAKER, INT or any dialing keys (0-9, #,
	*) on the destination handset.

4.Now the party at the originating handset can have a INTERCOM conversation with the party at the destination handset. Both screens display INTERCOM.

5.Press OFF/CLEAR on the originating handset, or place it

back in the telephone base or charger to transfer the external call to the destination handset. The originating handset displays CALL TRANSFERED.

If you wish to cancel call transfer during intercom mode and reconnect to the external call:

•Press /FLASH on the originating handset.

-OR-

•Press OFF/CLEAR or INT on the destination handset, or place it back in the telephone base or charger.

•If the destination handset does not pick up the intercom call, the originating handset can return to the external call by pressing

/FLASH,

OFF/CLEAR or INT.

•If a call remains on hold for about 100 seconds, or if the destination handset is in the directory, in the call log, or out of range, the screen of the originating handset shows

UNABLE TO CALL TRY AGAIN and reconnects to the external call automatically.

BasicTelephoneoperation

www.vtechphones.com 17