Fortinet 4.0 MR1 manual Configuring the FortiFones on the internal network

Example FortiGate Voice branch office configuration	Configuring the FortiFones on the internal network
Password	The SIP phone user password for the phone assigned to this
	extension.
	For a FortiFone on the internal network to be able to register with
	the FortiGate Voice unit to get this extension, the FortiFone
	Register Name must consist of the extension First Name
	followed by the Last Name separated by one space. The
	FortiFone must also be configured with this Password and the IP
	address of the FortiGate Voice internal interface.
Dial Plan	Dial_Plan_1
Voicemail	Select
Voicemail Password	Enter the numeric password that the SIP user must enter to get
	voicemail. The password can contain numbers only.
Email Notification	Select
Email Attachment	Select to attach a recording of the user’s voicemail message to
	the voicemail notification email.
Auto Delete	Select to automatically delete voicemail messages.
Maximum Message #	50
	The FortiGate Voice unit keeps up to 50 voicemail messages for
	this extension.

3Select OK to add the extension.

4Repeat to add more extensions.

Configuring the FortiFones on the internal network

This section contains high-level instructions for installing and configuring FortiFones for the example configuration. For more detailed information see the FortiFone documentation.

To configure FortiFones on the internal network

The following steps describe how to configure a FortiFone on the internal network with extension number 6001. This procedure would also apply to configuring a FortiFone for most networks. See the documentation supplied with the FortiFone for details.

1Connect and power on the FortiFone handset.

2Connect to the handset web configuration interface.

The default web configuration interface address is http://192.168.0.1. To connect to this address from a PC, your PC should have an IP address on the 192.168.0.0 subnet, for example: 192.168.0.10/255.255.255.0.

The default Username is root. No password is required.

3Go to Network > LAN Settings and set the IP Type to DHCP Client and select Submit.

4Select Save & Reboot to save the IP addressing change.

5Log into the FortiFone using the IP address it acquired from the DHCP server.

6Go to SIP Settings > Service Domain and add the following configuration information:

Active	On
Display Name	The name to be displayed on the phone. This name is only
	displayed on this phone. When this phone calls another phone
	the name displayed is the First Name and Last Name added to
	the FortiGate Voice Extension configuration.

FortiGate Voice Version 4.0 MR1 Administration Guide

01-410-112851-2010060127 http://docs.fortinet.com/ • Feedback