Fortinet 4.0 MR1 manual Config pbx did, Variables Description Default

config pbx did FortiGate Voice VoIP, PBX, and PSTN CLI Reference

Variables	Description	Default
edit	Enter the name for the dial plan. If you entering an existing	No
<pbx_dialplan_name>	dial plan, select Tab to get to the dial plan that you want to	default
	edit.
comments	Optionally enter a description of the dial plan.	No
<comment_string>		default
config rule	Configure a new dial plan rule.	No
		default
edit <rule_name_str>	Enter the name of the dial plan rule to configure.	No
		default
action {allow	Set the action to allow if this dial plan rule should allow a	No
block}	call. Set the action to block if the dial plan should block a	default
	call. For example, if you want to block international calls
	you could set the Phone Number begin with to 011 and set
	the action to block.
callthrough {fxo1	Select one or more destinations that the dial plan rule	No
fxo2 fxo3 fx04	sends outgoing calls to. fxo1, fxo2, fxo3, and fx04 are	default
<voip_providers>}	the 4 PSTN interfaces. <voip_providers> are the VoIP
	providers added to the FortiGate Voice. A dial plan rule
	can send calls to one or more destinations.
outgoing-prefix	If you set use-global-outgoing-prefix to no you	null
<pattern_str>	can enter a different outgoing prefix for this dial plan.
phone-no-beginwith	Enter the leading digits of the phone number that this dial	null
<patern_str>	plan rule should match with. For example, a dial plan rule
	for toll free numbers in North America should begin with
	18. The FortiGate Voice uses a best match to match a
	dialed number with a dial plan. So each dial plan should
	have a different Phone number Begin with setting. But you
	should plan your dial plan to make sure that unexpected
	matches do not occur.
prepend	Add digits that should be prepended or added to the	null
<pattern_str>	beginning of the dialed number before the call is
	forwarded to its destination. You can prepend digits at the
	beginning of a call of special dialing is required to reach
	and external phone system.
use-global-	Select yes if the dial plan rule should use the default	yes
outgoing-prefix {no	outgoing prefix (usually 9). Select no to add a different
yes}	outgoing-prefix.

config pbx did

Use this command to configure Direct Inward Dialing (DID). DID allows calls from external phone systems to dial directly to extensions added to the FortiGate Voice unit.

Syntax

config pbx did

edit <pbx_did_name>

set external-line {fxo1 fxo2 fxo3 fx04 <voip_providers>}

set cid-number <phone_number> set extension <extension_number> set comment <comment_string>

end

FortiGate Voice Version 4.0 MR1 Administration Guide

5001-410-112851-20100601http://docs.fortinet.com/ • Feedback