Fortinet 4.0 MR1 manual Config pbx ringgrp

FortiGate Voice VoIP, PBX, and PSTN CLI Reference config pbx ringgrp

Variables	Description	Default
country-area	Enter the name of the country in which the FortiGate Voice	USA
<country_name>	unit is installed.
extension-pattern	Enter a pattern that defines the valid extensions that can	null
<extension_pattern>	be added to the FortiGate Voice configuration. The pattern
	can include numbers that must be in every extension and
	upper case Xs to indicate the number of digits. The
	extension range can only contain numbers and the letter
	X.
	• If you add numbers to the extension range, all
	extensions added to this FortiGate Voice unit must
	include the same numbers in the same location in the
	extension number. For example, if you include a 6 as
	the first digit, all extensions added this FortiGate Voice
	unit must begin with the number 6.
	• The Xs indicate the number of digits in addition to the
	required number that each extension must have. For
	example, 6XXX indicates the extensions must start with
	the number 6 and be followed by any three numbers.
	Usually you would add one or two numbers to the start of
	the extension range to identify the extensions for this PBX
	and follow this with enough Xs to be able to add the
	required number of extensions.
	The extension range should not begin with the same
	number as the outgoing prefix.
local-area-code	Enter the local area code for the country or region in which	408
<code_string>	you are installing the FortiGate Voice unit.
max-voicemail	Limit the length of voicemail messages in seconds. Set to	60
<max_length_seconds>	0 for no limit.
outgoing-prefix	The number that PBX users must dial to get an outside	9
<pattern_str>	line. For example, if users should dial 9 to get an outside
	line, add 9 to this field. The outgoing prefix should not be
	the same as the first number of the extension range.
ring-timeout	The number of seconds that an extension should be	20
<time_int>	allowed to ring before going to voicemail.
rtp-hold-timeout	The amount of time in seconds that the extension will wait	0
<time_int>	on hold for RTP packets before hanging up the call. 0
	means no time limit.
rtp-timeout	The amount of time in seconds during an active call that	60
<time_int>	the extension will wait for RTP packets before hanging up
	the call. 0 means no time limit.
voicemail-extension	Enter the voicemail extension number that a user will use	No
<access_number>	to access their voicemail inbox.	default

config pbx ringgrp

Use this command to add and configure the extension groups. An extension group here is referred to a ring group and is a group of extensions that can be called using one number. You can configure the ring group to call all of the extensions in the group at the same time or to call the extensions one at a time until someone answers.

Note: The order in which the members are added to the ring group does not match the order in which the FortiGate Voice unit calls them.

FortiGate Voice Version 4.0 MR1 Administration Guide

01-410-112851-2010060153 http://docs.fortinet.com/ • Feedback