Fortinet 4.0 MR1 manual Go to PBX Calling Rules Dial Plan to add a dial plan

FortiGate Voice web-based manager configuration reference PBX configuration

Figure 10: Configuring a dial plan

Go to PBX > Calling Rules > Dial Plan to add a dial plan.

General dial plan list settings

Create New	Select to configure a dial plan. You can add multiple dial plans and assign them
	to different extensions. For example, you might want to have a dial plan that
	allows long distance calls and a dial plan that does not.
Name	The name of the dial plan.

#of Entries The number of entries in each dial plan.

Comments An optional description of the dial plan.

Dial plan rule configuration settings

Name

Use Default

Outgoing

Prefix("9")

Enter a descriptive name for the dial plan rule.

Select this checkbox if the dial plan rule should use the default outgoing prefix (usually 9).

Outgoing Prefix If you clear the Use Default Outgoing Prefix checkbox you can enter a different outgoing prefix for this dial plan.

Phone number Begin with

Enter the leading digits of the phone number that this dial plan rule should match with. For example, a dial plan rule for toll free numbers in North America should begin with 18. The FortiGate Voice uses a best match to match a dialed number with a dial plan. So each dial plan should have a different Phone number Begin with setting. But you should plan your dial plan to make sure that unexpected matches do not occur.

FortiGate Voice Version 4.0 MR1 Administration Guide
01-410-112851-20100601	41
http://docs.fortinet.com/ • Feedback