Restart Scenarios
4.When control is passed to the code in RAM, the following message displays:
Starting...
5.The telephone detects and displays the speed of the Ethernet interface in Mbps, that is, 0, 10, or 100. The message No Ethernet displays until the software determines whether the interface is 10 Mbps or 100 Mbps.
Note:
The Ethernet speed indicated is the LAN interface speed for both the telephone and any attached PC.
6.The software determines whether sufficient IP Address information was downloaded. In this scenario, it is discovered that sufficient information has not been downloaded. The following message displays while the DHCP process is invoked:
DHCP: 0 secs * to program
The number of elapsed seconds is incremented once per second, until DHCP successfully completes.
7. The following message displays while the TFTP or HTTP process is invoked:
TFTP: n
www.xxx.yyy.zzz
HTTP: n uri
The number increments once per second, until the TFTP or HTTP server responds.
8.The following message displays while the upgrade script is downloaded from the TFTP server:
46XXUPGRADE.SCR n KB received
where n is the number of KBs downloaded.
9.The script file is processed. The software determines that the name of the boot code file in the telephone (BOOTNAME) is the latest version, and the name of the application file in the telephone is the same as APPNAME.
10.
11.Upon completion of registration,