Avaya 555-233-128 manual Enabling/Disabling the Fkeu Xmod Interface, Mute 3 5 3 8 # Mute F K E U#

Page 66

Local Administrative Options

4.Press the * button to terminate the procedure, or the # button to save the new values. If you press the # button, the following text displays.

New value being saved

The new values are saved, and the user interface is restored to its previous state.

Enabling/Disabling the FKEU (XMOD) Interface

This procedure applies only to the 4610SW, 4620/4620SW, 4621SW, 4622SW, and 4625SW IP Telephones, which have a feature key expansion module (FKEU) interface jack. The interface jack provides connection for a button module, also called an expansion unit. This procedure enables or disables the FKEU protocol. To attach and use an expansion module with any of the telephones listed, the FKEU (XMOD) interface must be enabled.

1.While the telephone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 3 5 3 8 # (Mute F K E U#)

Note:

Press the Mute button momentarily. Do not press this button while pressing other keys/buttons. Pressing the Hold button instead of the Mute button also works.

One of the following texts displays left-justified at the top of the display, depending on the current value of the system parameter NVXMOD:

If NVXMOD=1:

If NVXMOD=0:

FKEU=on 0=Off #=OK

FKEU=off 1=Manual #=OK

2.Press the 1 or 0 button to enable or disable the expansion module interface respectively, or the # button to leave the current value. The following text displays left-justified at the top of the display:

Save new values?

*=no #=yes

66 4600 Series IP Telephone Installation Guide

Image 66

Contents Series IP Telephone Installation Guide Avaya Inc All Rights Reserved Introduction Local Administrative Options Index 103 Contents Series IP Telephone Installation Guide About This Guide IP Telephone Model H323 Protocol Supported?Installation Guide Intended AudienceDocument Organization Change History What’s New in This Release FilterlistTerms Used in This Guide Conventions Used in This Guide Symbolic ConventionsCommand Typographic ConventionsOnline Documentation Related DocumentsAvaya Communication Manager Software Documentation Release Series IP Telephone Safety Instructions Administrator Guide for Avaya Communication ManagerAvaya IP Telephone Snmp Security White Paper, Issue 30A Switched Hub Set Up Quick Reference, Issue 2, July 20024602/4602SW IP Telephone User Guide Series IP Telephone LAN Administrator GuideIP Telephone User Guide 4602/4602SW SIP IP Telephone User GuideCustomer Support Administrator Guide IntroductionIP Telephone Models SoftwareMedia Server Avaya IP IP Telephone Release Pre-Installation ChecklistRequirements to Verify about the Network Except20 4600 Series IP Telephone Installation Guide Requirements to Verify for Each IP Telephone Optional Items for Some IP TelephonesPowering the 4600 IP Telephone Assembling the 4600 Series IP TelephoneTelephone Model See Connection Jacks on a 4606/4612/4624 IP Telephone Assembling the 4600 Series IP Telephone 26 4600 Series IP Telephone Installation Guide = optional Facultatif DSS 4624 optionale Opcional 28 4600 Series IP Telephone Installation Guide Assembling the 4600 Series IP Telephone Connection Jacks on a 4630 IP Telephone Connection Jacks on a 4630SW IP Telephone Option a Connection Jacks on a 4630SW IP Telephone Option B Connection Jacks on a 4610SW IP Telephone Option a Connection Jacks on a 4610SW IP Telephone Option B Connection Jacks on a 4690 IP Conference Telephone Dynamic Addressing Process Ethernet Activation 802.1X Supplicant AuthenticationPassword= #=OK 802.1X ID=ddd #=OK New=Waiting for AuthenticationDhcp Processing Dhcp s secs # to program Dhcp s secs Vlan ID = n46xxUPGRADE.SCR n KB received TFTP/HTTP ProcessingHttp n uri Saving to flash 1%, 1 secs Media Server RegistrationFilename KB received Extension=nnnnnn #=OK NEW=Downgrading Avaya IP Telephones H.323 Only Converting Software on Avaya 4600 Series IP Telephones Displays Enter command Converting 4602+/4610SW/4620SW/4621SW IP TelephonesInformation, see Signaling Protocol Unnamed Registration 802.1X Supplicant Operation46 4600 Series IP Telephone Installation Guide Local Administrative Options Entering Data for Administrative Options Conference button IP Telephone # Backspace AlternativeSpeaker button Headset buttonEntering Data for the 4601 IP Telephone About Local Administrative Procedures Local Programming Option Code SeeE a R Mute 8 0 2 1 9 # Mute 8 0 2 1 x # Set the 802.1X Operational Mode802.1X=setting *=change #=OK Save new value? =no #=yesPre-Installation Checklist for Static Addressing Static Addressing InstallationNnn.nnn.nnn.nnn Phone= Phone=nnn.nnn.nnn.nnnNew= CallSv=nnn.nnn.nnn.nnnCallSvPort=nnnnn New= 802.1Q=off 1=on #=OK 802.1Q=on 0=off #=OKSave new values? *=no #=yes Vlan ID=dddd New=Vlan test=ddd New= New values being savedHandset AGC=on 0=off #=OK Handset AGC=off 1=on #=OK Disable/Enable Automatic Gain ControlMute 2 4 2 # Mute a G C # Headset AGC=on 0=off #=OK Headset AGC=off 1=on #=OKVisual/Audible Alerting Procedure Alerting=setting *=change #=OKMute 2 5 3 7 8 # Mute a L E R T # 60 4600 Series IP Telephone Installation Guide Manually Setting the Dhcp Client Hardware Address Mute 2 4 2 3 3 7 # Mute C H a D D R #Chaddr=dddddd New= Clear Procedure Are you sure? =no #=yes Mute 2 5 3 2 7 # Mute C L E a R #Clear all values? =no #=yes Clearing valuesAdjusting the Contrast Control Mute 2 6 6 8 # Mute C O N T #= 0=+ #=OK Mute 2 8 4 # Mute C T I # Computer-Telephony Integration CTI Enable/DisableCTI=manual 0=Off #=OK CTI=disabled 1=Manual #=OK UDP Port=497xx New=FKEU=on 0=Off #=OK FKEU=off 1=Manual #=OK Enabling/Disabling the Fkeu Xmod InterfaceMute 3 5 3 8 # Mute F K E U# Save new values? =no #=yesMute 4 7 6 8 7 Mute G R O U P Group IdentifierNo new values? #=OK Group=ddd New=Interface Control Mute 4 6 8 # Mute I N T #PHY1=status *=change #=OK PHY2=status *=change #=OK IR=enabled 0=disable #=OK IR=disabled 1=enable #=OK Disable/Enable Event Logging Mute 5 6 4 # Mute L O G #Log=status *=change #=OK Login Enter Extension Enter Extension and press Enter or OK LogoffMute 5 6 4 6 3 3 # Mute L O G O F F # Mute 6 3 3 # Mute O F F # QoS Option SettingTurning Off the Backlight Mute 7 6 7 # Mute Q O S #L3 audio=dd New= L2 signaling=d New=L3 signaling=dd New= No new values. #=OKMute 7 3 7 3 8 # Mute R E S E T # Reset System ValuesReset values? *=no #=yes Are you sure? *=no #=yesResetting values Restart the TelephoneRestart phone? =no #=yes Signaling Protocol Identifier Mute 7 4 4 Mute S I GSIG=protocol *=change #=OK Site-Specific Option Number Setting Mute 7 7 6 6 # Mute S S O N #SSON=ddd New= Setting L2Q Tagging Control 4601 Only Mute 8 2 4 # Mute T a G #Self-Test Procedure Mute 8 3 7 8 # Mute T E S T #Self test #=end Self test passed #=endSelf test failed #=end Troubleshooting Guidelines Error ConditionsPower Interruption Dtmf Tones46ccDccc View Administrative OptionView settings *=next #=exit CcccccccccccNnnnnnnnn Pass-thru modeSupplicant mode CccccccccFilename.ext Viewing Parameter ValuesName System Value Format Ccccccc EthernetError and Status Messages Aaa.bbb.ccc.dddExtension Hardware Registration Troubleshooting the 4601 IP Telephone Use by Visual Indication/Cause/Resolution Reset values? =no #=yes Scenarios for the Restart ProcessRestart the Telephone Restarting Boot File Needs to be UpgradedLoading 5 secs Replbootv3.app 4084KB InitializingStarting Updating boot code Dhcp 0 secs * to programTftp n Http n uri Loading 5 secs App 4035 KB Appfilename n KB receivedSaving to flash n%, x secs StartingClearing SecsUpdating Where n is the number of KBs downloaded Appfilename n KB received 102 4600 Series IP Telephone Installation Guide Index 104 4600 Series IP Telephone Installation Guide Visual Alerting What’s New Index 106 4600 Series IP Telephone Installation Guide