Avaya 555-233-128 View Administrative Option, View settings *=next #=exit, 46ccDccc, Cccccccccccc

Page 85

The View Administrative Option

The View Administrative Option

If you are using static addressing and encounter problems, use the following procedure to verify the current values of system parameters and file versions. Viewing the Protocol parameter is a way to determine whether the telephone has H.323 or SIP software installed.

Note:

Also use the ADDR option to view IP Addresses and verify whether you were provided with correct IP Addresses. See Static Addressing Installation in Chapter 3: Local Administrative Options.

The 4601and 4601+ IP Telephones do not support the V I E W option.

1.While the telephone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 8 4 3 9 # (Mute V I E W #)

Note:

Press the Mute button momentarily. Do not press this key while pressing other keys. The 4630/4630SW IP Telephones and the 4690 IP Conference Telephone do not have a dedicated Hold button. For all other 4600 Series IP Telephones, pressing the Hold button instead of the Mute button also works.

The following text displays left-justified at the top of the display:

View settings *=next #=exit

2.Press the * button at any time during viewing to display the next name and system value pair from Table 2. The first pair returns after the last pair displays.

Press the # button at any time during viewing to terminate the procedure and restore the user interface to its previous state. The names and values display in the following order:

Table 2: Viewing Parameter Values

Name	System Value	Format

Model	46ccDccc	Up to 8 ASCII characters: Model.

Phone SN	cccccccccccc	Telephone Serial Number, up to 18 ASCII
	cccccccc	characters (which display on both lines).

1 of 3

Issue 6 February 2007 85

Image 85

Contents Series IP Telephone Installation Guide Avaya Inc All Rights Reserved Introduction Local Administrative Options Index 103 Contents Series IP Telephone Installation Guide IP Telephone Model H323 Protocol Supported? About This GuideIntended Audience Installation GuideDocument Organization Change History Filterlist What’s New in This ReleaseTerms Used in This Guide Command Symbolic ConventionsConventions Used in This Guide Typographic ConventionsRelated Documents Online DocumentationAvaya Communication Manager Software Documentation Release Avaya IP Telephone Snmp Security White Paper, Issue Administrator Guide for Avaya Communication ManagerSeries IP Telephone Safety Instructions 30A Switched Hub Set Up Quick Reference, Issue 2, July 2002IP Telephone User Guide Series IP Telephone LAN Administrator Guide4602/4602SW IP Telephone User Guide 4602/4602SW SIP IP Telephone User GuideCustomer Support Introduction Administrator GuideSoftware IP Telephone ModelsRequirements to Verify about the Network Pre-Installation ChecklistMedia Server Avaya IP IP Telephone Release Except20 4600 Series IP Telephone Installation Guide Optional Items for Some IP Telephones Requirements to Verify for Each IP TelephoneAssembling the 4600 Series IP Telephone Powering the 4600 IP TelephoneTelephone Model See Connection Jacks on a 4606/4612/4624 IP Telephone Assembling the 4600 Series IP Telephone 26 4600 Series IP Telephone Installation Guide = optional Facultatif DSS 4624 optionale Opcional 28 4600 Series IP Telephone Installation Guide Assembling the 4600 Series IP Telephone Connection Jacks on a 4630 IP Telephone Connection Jacks on a 4630SW IP Telephone Option a Connection Jacks on a 4630SW IP Telephone Option B Connection Jacks on a 4610SW IP Telephone Option a Connection Jacks on a 4610SW IP Telephone Option B Connection Jacks on a 4690 IP Conference Telephone Dynamic Addressing Process Password= #=OK 802.1X Supplicant AuthenticationEthernet Activation 802.1X ID=ddd #=OK New=Dhcp Processing AuthenticationWaiting for Dhcp s secs # to program Dhcp s secs Vlan ID = nTFTP/HTTP Processing 46xxUPGRADE.SCR n KB receivedHttp n uri Filename KB received Media Server RegistrationSaving to flash 1%, 1 secs Extension=nnnnnn #=OK NEW=Downgrading Avaya IP Telephones H.323 Only Converting Software on Avaya 4600 Series IP Telephones Converting 4602+/4610SW/4620SW/4621SW IP Telephones Displays Enter commandInformation, see Signaling Protocol 802.1X Supplicant Operation Unnamed Registration46 4600 Series IP Telephone Installation Guide Local Administrative Options Entering Data for Administrative Options Speaker button IP Telephone # Backspace AlternativeConference button Headset buttonEntering Data for the 4601 IP Telephone Local Programming Option Code See About Local Administrative ProceduresE a R 802.1X=setting *=change #=OK Set the 802.1X Operational ModeMute 8 0 2 1 9 # Mute 8 0 2 1 x # Save new value? =no #=yesStatic Addressing Installation Pre-Installation Checklist for Static AddressingNew= Phone=nnn.nnn.nnn.nnnNnn.nnn.nnn.nnn Phone= CallSv=nnn.nnn.nnn.nnn802.1Q=off 1=on #=OK 802.1Q=on 0=off #=OK CallSvPort=nnnnn New=Vlan test=ddd New= Vlan ID=dddd New=Save new values? *=no #=yes New values being savedMute 2 4 2 # Mute a G C # Disable/Enable Automatic Gain ControlHandset AGC=on 0=off #=OK Handset AGC=off 1=on #=OK Headset AGC=on 0=off #=OK Headset AGC=off 1=on #=OKAlerting=setting *=change #=OK Visual/Audible Alerting ProcedureMute 2 5 3 7 8 # Mute a L E R T # 60 4600 Series IP Telephone Installation Guide Mute 2 4 2 3 3 7 # Mute C H a D D R # Manually Setting the Dhcp Client Hardware AddressChaddr=dddddd New= Clear Procedure Clear all values? =no #=yes Mute 2 5 3 2 7 # Mute C L E a R #Are you sure? =no #=yes Clearing valuesMute 2 6 6 8 # Mute C O N T # Adjusting the Contrast Control= 0=+ #=OK CTI=manual 0=Off #=OK CTI=disabled 1=Manual #=OK Computer-Telephony Integration CTI Enable/DisableMute 2 8 4 # Mute C T I # UDP Port=497xx New=Mute 3 5 3 8 # Mute F K E U# Enabling/Disabling the Fkeu Xmod InterfaceFKEU=on 0=Off #=OK FKEU=off 1=Manual #=OK Save new values? =no #=yesNo new values? #=OK Group IdentifierMute 4 7 6 8 7 Mute G R O U P Group=ddd New=Mute 4 6 8 # Mute I N T # Interface ControlPHY1=status *=change #=OK PHY2=status *=change #=OK IR=enabled 0=disable #=OK IR=disabled 1=enable #=OK Mute 5 6 4 # Mute L O G # Disable/Enable Event LoggingLog=status *=change #=OK Logoff Login Enter Extension Enter Extension and press Enter or OKMute 5 6 4 6 3 3 # Mute L O G O F F # Turning Off the Backlight QoS Option SettingMute 6 3 3 # Mute O F F # Mute 7 6 7 # Mute Q O S #L3 signaling=dd New= L2 signaling=d New=L3 audio=dd New= No new values. #=OKReset values? *=no #=yes Reset System ValuesMute 7 3 7 3 8 # Mute R E S E T # Are you sure? *=no #=yesRestart the Telephone Resetting valuesRestart phone? =no #=yes Mute 7 4 4 Mute S I G Signaling Protocol IdentifierSIG=protocol *=change #=OK Mute 7 7 6 6 # Mute S S O N # Site-Specific Option Number SettingSSON=ddd New= Mute 8 2 4 # Mute T a G # Setting L2Q Tagging Control 4601 OnlyMute 8 3 7 8 # Mute T E S T # Self-Test ProcedureSelf test passed #=end Self test #=endSelf test failed #=end Error Conditions Troubleshooting GuidelinesDtmf Tones Power InterruptionView settings *=next #=exit View Administrative Option46ccDccc CcccccccccccSupplicant mode Pass-thru modeNnnnnnnnn CccccccccName System Value Format Viewing Parameter ValuesFilename.ext Ccccccc EthernetAaa.bbb.ccc.ddd Error and Status MessagesExtension Hardware Registration Troubleshooting the 4601 IP Telephone Use by Visual Indication/Cause/Resolution Scenarios for the Restart Process Reset values? =no #=yesRestart the Telephone Loading 5 secs Replbootv3.app 4084KB Boot File Needs to be UpgradedRestarting InitializingDhcp 0 secs * to program Starting Updating boot codeTftp n Http n uri Saving to flash n%, x secs Appfilename n KB receivedLoading 5 secs App 4035 KB StartingSecs ClearingUpdating Where n is the number of KBs downloaded Appfilename n KB received 102 4600 Series IP Telephone Installation Guide Index 104 4600 Series IP Telephone Installation Guide Visual Alerting What’s New Index 106 4600 Series IP Telephone Installation Guide