Avaya 555-233-128 manual Scenarios for the Restart Process, Restart the Telephone

Page 95

Appendix A: Restart Scenarios

Scenarios for the Restart Process

The sequence of the restart process depends on the status of the boot and application files. This appendix explains the different scenarios possible.

Note:

The display messages shown in this appendix do not apply to the 4601 IP

Telephone.

Restart the Telephone

Use the following procedure to restart the telephone.

1.While the telephone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 7 3 7 3 8 # (Mute R E S E T #)

Note:

Press the Mute button momentarily. Do not press this key while pressing other keys. The 4630/4630SW IP Telephones and the 4690 IP Conference Telephone do not have a dedicated Hold button. For all other 4600 Series IP Telephones, pressing the Hold button instead of the Mute button also works.

The following text displays left-justified at the top of the display:

Reset values?

*=no #=yes

2.Press the # button to continue the procedure.

The following text displays left-justified at the top of the display while the system values are reset to defaults:

Resetting values.

Once the system values are reset, the following prompt displays:

Restart phone?

*=no #=yes

Issue 6 February 2007 95

Image 95

Contents Series IP Telephone Installation Guide Avaya Inc All Rights Reserved Introduction Local Administrative Options Index 103 Contents Series IP Telephone Installation Guide IP Telephone Model H323 Protocol Supported? About This GuideDocument Organization Installation GuideIntended Audience Change History Filterlist What’s New in This ReleaseTerms Used in This Guide Typographic Conventions Symbolic ConventionsCommand Conventions Used in This GuideAvaya Communication Manager Software Documentation Release Online DocumentationRelated Documents 30A Switched Hub Set Up Quick Reference, Issue 2, July 2002 Administrator Guide for Avaya Communication ManagerAvaya IP Telephone Snmp Security White Paper, Issue Series IP Telephone Safety Instructions4602/4602SW SIP IP Telephone User Guide Series IP Telephone LAN Administrator GuideIP Telephone User Guide 4602/4602SW IP Telephone User GuideCustomer Support Introduction Administrator GuideSoftware IP Telephone ModelsExcept Pre-Installation ChecklistRequirements to Verify about the Network Media Server Avaya IP IP Telephone Release20 4600 Series IP Telephone Installation Guide Optional Items for Some IP Telephones Requirements to Verify for Each IP TelephoneAssembling the 4600 Series IP Telephone Powering the 4600 IP TelephoneTelephone Model See Connection Jacks on a 4606/4612/4624 IP Telephone Assembling the 4600 Series IP Telephone 26 4600 Series IP Telephone Installation Guide = optional Facultatif DSS 4624 optionale Opcional 28 4600 Series IP Telephone Installation Guide Assembling the 4600 Series IP Telephone Connection Jacks on a 4630 IP Telephone Connection Jacks on a 4630SW IP Telephone Option a Connection Jacks on a 4630SW IP Telephone Option B Connection Jacks on a 4610SW IP Telephone Option a Connection Jacks on a 4610SW IP Telephone Option B Connection Jacks on a 4690 IP Conference Telephone Dynamic Addressing Process 802.1X ID=ddd #=OK New= 802.1X Supplicant AuthenticationPassword= #=OK Ethernet ActivationDhcp s secs # to program Dhcp s secs Vlan ID = n AuthenticationDhcp Processing Waiting forHttp n uri 46xxUPGRADE.SCR n KB receivedTFTP/HTTP Processing Extension=nnnnnn #=OK NEW= Media Server RegistrationFilename KB received Saving to flash 1%, 1 secsDowngrading Avaya IP Telephones H.323 Only Converting Software on Avaya 4600 Series IP Telephones Converting 4602+/4610SW/4620SW/4621SW IP Telephones Displays Enter commandInformation, see Signaling Protocol 802.1X Supplicant Operation Unnamed Registration46 4600 Series IP Telephone Installation Guide Local Administrative Options Entering Data for Administrative Options Headset button IP Telephone # Backspace AlternativeSpeaker button Conference buttonEntering Data for the 4601 IP Telephone Local Programming Option Code See About Local Administrative ProceduresE a R Save new value? =no #=yes Set the 802.1X Operational Mode802.1X=setting *=change #=OK Mute 8 0 2 1 9 # Mute 8 0 2 1 x #Static Addressing Installation Pre-Installation Checklist for Static AddressingCallSv=nnn.nnn.nnn.nnn Phone=nnn.nnn.nnn.nnnNew= Nnn.nnn.nnn.nnn Phone=802.1Q=off 1=on #=OK 802.1Q=on 0=off #=OK CallSvPort=nnnnn New=New values being saved Vlan ID=dddd New=Vlan test=ddd New= Save new values? *=no #=yesHeadset AGC=on 0=off #=OK Headset AGC=off 1=on #=OK Disable/Enable Automatic Gain ControlMute 2 4 2 # Mute a G C # Handset AGC=on 0=off #=OK Handset AGC=off 1=on #=OKMute 2 5 3 7 8 # Mute a L E R T # Visual/Audible Alerting ProcedureAlerting=setting *=change #=OK 60 4600 Series IP Telephone Installation Guide Chaddr=dddddd New= Manually Setting the Dhcp Client Hardware AddressMute 2 4 2 3 3 7 # Mute C H a D D R # Clear Procedure Clearing values Mute 2 5 3 2 7 # Mute C L E a R #Clear all values? =no #=yes Are you sure? =no #=yes= 0=+ #=OK Adjusting the Contrast ControlMute 2 6 6 8 # Mute C O N T # UDP Port=497xx New= Computer-Telephony Integration CTI Enable/DisableCTI=manual 0=Off #=OK CTI=disabled 1=Manual #=OK Mute 2 8 4 # Mute C T I #Save new values? =no #=yes Enabling/Disabling the Fkeu Xmod InterfaceMute 3 5 3 8 # Mute F K E U# FKEU=on 0=Off #=OK FKEU=off 1=Manual #=OKGroup=ddd New= Group IdentifierNo new values? #=OK Mute 4 7 6 8 7 Mute G R O U PPHY1=status *=change #=OK Interface ControlMute 4 6 8 # Mute I N T # PHY2=status *=change #=OK IR=enabled 0=disable #=OK IR=disabled 1=enable #=OK Log=status *=change #=OK Disable/Enable Event LoggingMute 5 6 4 # Mute L O G # Mute 5 6 4 6 3 3 # Mute L O G O F F # Login Enter Extension Enter Extension and press Enter or OKLogoff Mute 7 6 7 # Mute Q O S # QoS Option SettingTurning Off the Backlight Mute 6 3 3 # Mute O F F #No new values. #=OK L2 signaling=d New=L3 signaling=dd New= L3 audio=dd New=Are you sure? *=no #=yes Reset System ValuesReset values? *=no #=yes Mute 7 3 7 3 8 # Mute R E S E T #Restart phone? =no #=yes Resetting valuesRestart the Telephone Mute 7 4 4 Mute S I G Signaling Protocol IdentifierSIG=protocol *=change #=OK SSON=ddd New= Site-Specific Option Number SettingMute 7 7 6 6 # Mute S S O N # Mute 8 2 4 # Mute T a G # Setting L2Q Tagging Control 4601 OnlyMute 8 3 7 8 # Mute T E S T # Self-Test ProcedureSelf test failed #=end Self test #=endSelf test passed #=end Error Conditions Troubleshooting GuidelinesDtmf Tones Power InterruptionCccccccccccc View Administrative OptionView settings *=next #=exit 46ccDcccCcccccccc Pass-thru modeSupplicant mode NnnnnnnnnCcccccc Ethernet Viewing Parameter ValuesName System Value Format Filename.extAaa.bbb.ccc.ddd Error and Status MessagesExtension Hardware Registration Troubleshooting the 4601 IP Telephone Use by Visual Indication/Cause/Resolution Restart the Telephone Reset values? =no #=yesScenarios for the Restart Process Initializing Boot File Needs to be UpgradedLoading 5 secs Replbootv3.app 4084KB RestartingTftp n Http n uri Starting Updating boot codeDhcp 0 secs * to program Starting Appfilename n KB receivedSaving to flash n%, x secs Loading 5 secs App 4035 KBUpdating ClearingSecs Where n is the number of KBs downloaded Appfilename n KB received 102 4600 Series IP Telephone Installation Guide Index 104 4600 Series IP Telephone Installation Guide Visual Alerting What’s New Index 106 4600 Series IP Telephone Installation Guide